Table of Contents
Advertisement
6
113
INTRODUCTION
113
FOR YOUR SAFETY
114
To prevent damage to your Q-See product or injury to yourself or to others, read and
115
understand the following safety precautions in their entirety before installing or using this
115
equipment. Keep these safety instructions where all those who use the product will read them.
116
116
117
120
n
Check the unit and any accessories included in the package immediately after opening. If
items are missing or damaged, repackage and return to the point of purchase.
120
122
n
Use the proper power source. Only use the power adapter supplied with your system. Do
123
not use this product with a power source that applies more than the specified voltage (100-
123
240V AC).
124
125
Never insert anything metallic into the DVR. Inserting anything into the DVR or its case can
n
125
be a source of dangerous electric shock.
126
127
Do not operate in dusty areas. Avoid placing the DVR in places that are dusty.
n
127
Do not expose this product to rain or use near water. If this product accidentally gets wet,
n
129
unplug it and contact Q-See immediately.
130
Keep product surfaces clean and dry. To clean the outside case of the DVR, gently wipe
n
130
using a lightly dampened cloth (only use water, do not use solvents).
133
146
Do not operate this DVR without the cover securely in place. Do not attempt to do any
n
147
repairs to the DVR yourself. If there are unusual sounds or smells coming from the DVR,
unplug it immediately and contact Q-See technical support. Under no circumstances
148
should the cover be removed while the device is connected to a power source. You should
only remove the cover to install/replace the hard disk drive (See Chapter 9) or replace the
standard 3v lithium cell battery on the motherboard. These are the only user serviceable
parts. You may need to replace the battery if the internal clock resets itself after a power
outage
Handle the DVR carefully. If you accidentally drop your DVR on any hard surface, it may
n
cause a malfunction. If the DVR doesn't work properly due to physical damage, contact an
authorized dealer for repair or exchange.
Make sure there is proper air circulation around the unit. This DVR system uses a hard drive
n
for video storage which generates heat during operation. Do not block air holes located on
the bottom, top, sides and back of the DVR as they are designed to keep the system cool
while running. Install or place this product in an area where there is ample air circulation.
Provide proper ventilation. This DVR has a built-in fan that properly ventilates the system.
n
Do not cover or impede this fan.
WARNING! ELECTRIC SHOCK RISK!
CHAPTER 1
7
- Quick Links:
- Qt5680 & Qt5682
Hide quick links:
Advertisement
Table of Contents
