Connections And Controls; Dvr Functions And Connections; Qt228 - QSee QT SERIES User Manual

CONNECTIONS AND CONTROLS

You may view this DVR using a standard 19" (or larger) VGA monitor or a television. The
former is connected using the VGA port on the back panel while the television utilizes the
BNC "Video Out" port on the back. Your DVR is configured to use the VGA port as the main
display. To use a TV, you will need to press and hold the STOP/ESC, EXIT or VGA/TV button
(depending on model) for approximately 10 seconds until you hear a beep indicating that the
video mode has been switched. A display connected to the other port will not show the menu.

2.1 DVR FUNCTIONS AND CONNECTIONS

10

QT228

CHAPTER 2
FRONT PANEL
QT228
ITEM NAME
1
2
3
4
REAR PANEL
ITEM NAME
1
2
3
4
5
6
7
8
9
FUNCTION
INDICATOR Shows the recording, network and power status of the DVR.
LIGHTS
INFRARED Receives signals from the remote control
WINDOW
Press and hold 10 seconds (or until you hear a beep) to switch
VIDEO MODE
BUTTON video output from the VGA port (default) to the BNC video out
port.
USB PORT Used for external USB backup devices.
1 2 3 4
FUNCTION
AUDIO IN 1 Channel of audio input
VIDEO IN Video input from up to 8 cameras
AUDIO OUT RCA Audio output for amplified speaker
VIDEO OUT BNC connector for TV or monitor
VGA output for 19" or larger monitor
VGA PORT
HDMI HDMI video output
LAN Network (ethernet) port
USB PORT For the USB mouse
DC IN Power input for 12V DC power supply
2
1 3
REC Net Power
TV/VGA
4
5
6 7 8 9
11