Advertisement
Check indication
Lamp status
[Lit] "检测指示灯" (check)
lamp (red)
Fault indication
Lamp status
[Blinking] All lamps
EH-SA60_CH.indb
43
Possible cause
Water supply
tank empty.
(In the steam
mode)
Appliance is not
on a level
surface.
Appliance is
sitting on a mat
or a carpet.
Possible cause
Internal safety
device has
triggered.
Remedy
Fill the water
supply tank
with water up to
"满水位"
(FULL).
(See page .)
Place on a level
surface.
Place on a
solid, flat
surface such as
a table or a tray.
Remedy
Switch the
appliance off
and on again.
If the safety
device triggers
repeatedly,
contact the
store where the
appliance was
purchased or
an authorized
service center.
2011/06/29
18:18:00
Advertisement
