Mitsubishi Electric PKA-RP1.6GAL Service Technical Manual page 85

Wireless remote controller pair number:
Setting operation
1. Press the SET button (using a pointed implement).
Check that the remote controller's display has stopped
before continuing.
MODEL SELECT flashes, and the model No. (3 digits)
appears (steadily-lit).
2. Press the MINUTE button twice.
The pair number appears flashing.
3. Press the temperature
number to set.
4. Press the SET button (using a pointed implement).
The set pair number is displayed (steadily-lit) for 3
seconds, then disappears.
buttons to select the pair
85
MODEL SELECT
ON/OFF
FAN
MODE VANE
CHECK LOUVER
TEST RUN
RESET
SET
SET button
Pair No.
Model No.
Temperature
button
TEMP
AUTO STOP
AUTO START
h
Minute
button
min
CLOCK