Motorola TimePort Portable Cell Phone User Manual page 49

Placing a Calling Card Call
Once you have stored your calling card information, recall the
information and place the call whenever you want to use your
calling card. Before your phone begins dialing, it will prompt
you for the number you want to call. Once you have entered the
number, your phone will automatically insert the number in
place of the Number Character you stored.
‰
1. Recall Press then enter the location number
Entry where your calling card sequence is stored.
æ ª
2. Enter Press (or
Number Number. Enter the phone number you are call-
ing. You may enter the number manually or
recall it by location.
3. Place Press and hold
Call phone will dial the number to access your
calling card service provider, then wait for
your input when it reaches the first pause.
a a a a
4. Send Press or press
More next group of numbers when the recording
Numbers prompts you. The phone will automatically
insert the number to call at the appropriate
spot in the sequence. Press
set of numbers until finished.
º
5. End Press , close the phone, or press and hold
a a a a
Call until you hear a high tone, and press
again to end the call.
). You will see: Enter
a a a a
to place the call. Your
æ ª
(or ) to send the
a a a a
to send each
a a a a
49