Motorola TimePort Portable Cell Phone User Manual page 22

Turning Your Phone On
To make the best use of available signals, your phone can
operate on both analog and CDMA digital systems. If your phone
finds a CDMA digital system, you will see the time and date and
the icon. If your phone finds an analog system, you will see
the icon.
Digital
Quad Number
Your phone can be activated with up to four unique phone
numbers. If more than one number is programmed, you will see
the currently active number whenever you turn ON the phone.
Turn to Changing Your Number on page 92 if you want to
change the active number.
Roaming
If your home network is not available when you turn your
Tip:
phone ON, your phone will briefly display:
Look for on
Rm
the second line
Power Save Mode
to know if you
If you travel outside the range of available networks, your phone
are roaming. See
page 25 for more
continues to search for a signal. To save power, it stops searching
info.
every couple of minutes. When this is the case, you will see:
Power Save
again in a minute or two – if you would like it to start searching
immediately, just press any key.
Standby Mode
Tip:
You can choose
To conserve energy, your phone enters standby mode and turns
how long the
OFF the backlight when you have not touched a key for a few
backlight
seconds. The backlight will come back ON as soon you press a
remains ON. See
page 99. key or open the phone.
22
1 2 2 5
Analog
Roaming
. Your phone will automatically begin searching
.