Safety Of Toner; About Toner; Toner On Clothing Or Skin; Notes When Handling A Lithium Battery - Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest

Turn power switch ON
The machine is equipped with 2 power switches: main power switch and control panel power
switch.
The machine goes on when the main power switch is turned on (i.e., other than in low power
mode, sleep mode).
Do not turn off the main power while the progress bar is indicated, during which access
is made to the HDD. If deprived of power, the HDD can suffer a fault (E602).

Safety of Toner

The machine's toner is a non-toxic material made of plastic, iron, and small amounts of dye.
• If your clothing or skin has come into contact with toner, wipe it off with tissue; then, wash it
off with water.
• Do not use warm water, which will cause the toner to jell and fuse permanently with the
fibers of the cloth.
• Tonner is easy to react with plastic material, avoid contact with plastic.

Notes When Handling a Lithium Battery

F-0-3

Notes Before it Works Serving

About Toner

Do not throw toner into fire. It may cause explosion.

Toner on Clothing or Skin

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
At servicing, be sure to turn OFF the power source according to the specified steps and
disconnect the power plug.
0-3