Canon imageRUNNER ADVANCE 9070 PRO series Service Manual Digest page 310

■ HT-C
COPIER> DISPLAY> HT-C
TGT-A-Y Dis of ARCDAT screen A Y-color target VL
Lv.2 Details To display the Y-patch target value of screen A in ARCDAT control.
When hue variation occurs and the displayed value is not in the
tolerable range, execute the auto gradation adjustment (reset the
target value). Check the Patch Sensor if not corrected.
Use case When hue variation occurs
Caution Take necessary action in accordance with the instructions from the
Quality Support Division.
Display/adj/set range 0 to 1023
Appropriate target value 0 to 700
Supplement/memo Screen A: High screen ruling screen
TGT-A-M Dis of ARCDAT screen A M-color target VL
Lv.2 Details To display the M-patch target value of screen A in ARCDAT control.
When hue variation occurs and the displayed value is not in the
tolerable range, execute the auto gradation adjustment (reset the
target value). Check the Patch Sensor if not corrected.
Use case When hue variation occurs
Caution Take necessary action in accordance with the instructions from the
Quality Support Division.
Display/adj/set range 0 to 1023
Appropriate target value 0 to 700
Default value 255
Supplement/memo Screen A: High screen ruling screen
TGT-A-C Dis of ARCDAT screen A C-color target VL
Lv.2 Details To display the C-patch target value of screen A in ARCDAT control.
5
When hue variation occurs and the displayed value is not in the
tolerable range, execute the auto gradation adjustment (reset the
target value). Check the Patch Sensor if not corrected.
Use case When hue variation occurs
Caution Take necessary action in accordance with the instructions from the
Quality Support Division.
Display/adj/set range 0 to 1023
Appropriate target value 0 to 700
Default value 255
Supplement/memo Screen A: High screen ruling screen
5-82
COPIER> DISPLAY> HT-C
TGT-A-K Dis of ARCDAT screen A Bk-clr target VL
Lv.2 Details To display the Bk-patch target value of screen A in ARCDAT control.
When hue variation occurs and the displayed value is not in the
tolerable range, execute the auto gradation adjustment (reset the
target value). Check the Patch Sensor if not corrected.
Use case When hue variation occurs
Caution Take necessary action in accordance with the instructions from the
Quality Support Division.
Display/adj/set range 0 to 1023
Appropriate target value 0 to 700
Default value 255
Supplement/memo Screen A: High screen ruling screen
TGT-B-Y Dis of ARCDAT screen B Y-color target VL
Lv.2 Details To display the Y-patch target value of screen B in ARCDAT control.
When hue variation occurs and the displayed value is not in the
tolerable range, execute the auto gradation adjustment (reset the
target value). Check the Patch Sensor if not corrected.
Use case When hue variation occurs
Caution Take necessary action in accordance with the instructions from the
Quality Support Division.
Display/adj/set range 0 to 1023
Appropriate target value 0 to 700
Default value 255
Supplement/memo Screen B: Low screen ruling screen
TGT-B-M Dis of ARCDAT screen B M-color target VL
Lv.2 Details To display the M-patch target value of screen B in ARCDAT control.
When hue variation occurs and the displayed value is not in the
tolerable range, execute the auto gradation adjustment (reset the
target value). Check the Patch Sensor if not corrected.
Use case When hue variation occurs
Caution Take necessary action in accordance with the instructions from the
Quality Support Division.
Display/adj/set range 0 to 1023
Appropriate target value 0 to 700
Default value 255
Supplement/memo Screen B: Low screen ruling screen