Yaesu FT-252 Operating Manual page 56

Set ( Menu ) Mode
s M i F
et oDe teM unction
24 [ MEM.TAG ]
Stores Alpha-Numeric "Tags" for the Memory channels.
25 [ NAME ]
Toggles the display indication between "frequency" and the
channel's "Alpha/Numeric Tag."
26 [ PASSWD ]
Enables/disables the Password feature.
27 [ PSWD W ]
Stores the password.
28 [ R SHFT ]
Sets the magnitude of the repeater Shift.
29 [ RESUME ]
Selects the Scan Resume mode.
30 [ REV/HM ] Selects the function of the [ HM/RV ] key.
31 [ RF SQL ]
Adjusts the RF Squelch threshold level.
32 [ RPT.MOD ]
Sets the Repeater Shift Direction.
33 [ PRI.RVT ]
Enables/disables the Priority Revert feature.
34 [ RXSAVE ]
Selects the Receive-mode Battery Saver interval ("sleep" ratio)
35 [ S SRCH ]
Selects the Smart Search Sweep mode.
36 [ SCN MD ]
Selects the Memory Scan channel-selection mode.
37 [ SCN.LMP ]
Enables/Disables the Scan lamp while paused.
38 [ SKIP ]
Selects the Memory Scan "Skip" channel-selection mode.
39 [ SPLIT ]
Enables or disables "VFO Split" operation.
40 [ SQL.TYP ]
Selects the Tone Encoder and/or Decoder mode.
41 [ TEMP ]
Indicate the current temperature inside the transceiver's case.
42 [ TN FRQ ]
Setting of the CTCSS Tone Frequency.
43 [ TOT ]
Setting of the TOT time.
44 [ TXSAVE ]
Enables/Disables the Transmitter Battery Saver.
45 [ WID.NAR ]
Select Wide (±5 kHz) or Narrow (±2.5 kHz) TX Deviation.
46 [ WX ALT ]
Enables/Disables the Weather Alert Scan feature.
54
A
vAilAble
( D
eFAult
FREQ / ALPHA
PWD.OFF / PWD. ON
0.00 - 99.95 MHz
BUSY / HOLD / TIME
<REV> / <HOME>
S-1 / S-2 / S-3 / S-4 / S-5 /
S-7 / S-FULL / OFF
RPT.OFF / RPT. – / RPT. +
RVT.OFF / RVT. ON
200 MS / 300 MS /500 MS /
1 SEC / 2 SSEC / OFF
SINGLE / CONT
ONLY / MEM
ON / OFF
OFF / SKIP / ONLY
SPL.OFF / SPL. ON
OFF / TONE / TSQL /
REV TN / DCS / ECS
50 CTCSS tones (100 Hz)
1MIN - 30MIN or OFF
SAV.OFF / SAV. ON
WIDE / NARROW
ALT.OFF / ALT. ON
FT-252 O
peraTing
v
Alues
)
: B I
old talIc
---
---
---
M
anual