Installing And Removing The Battery - Canon EOS 80D Instruction Manual

Installing and Removing the Battery

Load a fully-charged Battery Pack LP-E6N (or LP-E6) into the camera.
The camera's viewfinder becomes bright when a battery is
installed, and darkens when the battery is removed. If the battery
is not installed, the picture in the viewfinder becomes blurred and
focus cannot be achieved.
Installing the Battery
Only Battery Pack LP-E6N/LP-E6 can be used.
Removing the Battery
36
Open the cover.
1
Slide the lever as shown by the

arrows and open the cover.
Insert the battery.
2
Insert the end with the electrical

contacts.
Insert the battery until it locks in

place.
Close the cover.
3
Press the cover until it snaps shut.

Open the cover and remove the
battery.
Press the battery lock lever as shown

by the arrow and remove the battery.
To prevent short circuiting of the electrical

contacts, be sure to attach the provided
protective cover (p.34) to the battery.