Focusing With Af (Af Method) - Canon EOS 80D Instruction Manual

Focusing with AF (AF Method)

Selecting the AF Method
You can select an AF method to suit the shooting conditions and your
subject. The following AF methods are provided: [u(face)+Tracking]
(p.277), [FlexiZone - Multi] (p.279), and [FlexiZone - Single] (p.281).
If you want to achieve precise focus, set the lens's focus mode switch to
<MF>, magnify the image, and focus manually (p.288).
You can also set the AF method with [z5: AF method] (the [z3] tab in

Basic Zone modes).
The procedures on pages 277-282 assume that One-Shot AF is set. If

Servo AF is set, the AF point will turn blue when focus is achieved. The
beeper will not sound in this case (p.274).
In the <8: 5C> modes, Servo AF is set automatically and when

focus is achieved, the AF point will turn blue and the beeper will sound.
276
Press the <f> button.
1
Select the AF method.
2
Turn the <6> dial to select the AF

method, then press <0>.