O Setting Exposure Compensation - Canon EOS 80D Instruction Manual

O Setting Exposure CompensationN
Exposure compensation can brighten (increased exposure) or darken
(decreased exposure) the standard exposure set by the camera.
Exposure compensation can be set in the <d>, <s>, and <f> shooting
modes. Although you can set the exposure compensation up to ±5 stops* in
1/3-stop increments, the exposure compensation indicator in the viewfinder and
on the LCD panel can only display the setting up to ±3 stops. If you want to set
the exposure compensation setting beyond ±3 stops, use the Quick Control
(p.56) or follow the instructions for [z2: Expo.comp./AEB] on the next page.
If the <a> mode and the ISO Auto are both set, see page 197 to set the
exposure compensation.
* During Live View shooting, exposure compensation can be set up to ±3 stops.
Increased exposure
for a brighter image
Decreased exposure
for a darker image
If [z2: Auto Lighting Optimizer] (p.169) is set to any setting other than
[Disable], the image may still look bright even if a decreased exposure
compensation for a darker image is set.
The exposure compensation amount will remain in effect even after you

set the power switch to <2>.
After setting the exposure compensation amount, you can prevent the

exposure compensation amount from changing accidentally by setting
the <R> switch upward.
If the exposure compensation amount exceeds ±3 stops, the end of the

exposure level indicator will display <I> or <J>.
200
Check the exposure.
1
Press the shutter button halfway

(0) and check the exposure level
indicator.
Set the exposure compensation amount.
2
While looking in the viewfinder or at

the LCD panel, turn the <5> dial.
If it cannot be set, set the <R>

switch downward, then turn the <5>
dial.

If you set exposure compensation,
<O> will be displayed in the
viewfinder and on the LCD panel.
Take the picture.
3
To cancel the exposure compensation, set

the exposure compensation amount back
to <E>.