Table of Contents
Advertisement
35
coffee beans (approx. 300 g), then replace the
cover.
Adjust grinding by means of the grind adjustment
lever (17), positioning it on point 5 of the scale.
Never fill the coffee bean container with other
products. They might damage the machine!
Before filling the container with cof-
f e e
beans, make sure the pre-ground coffee container
is closed to prevent coffee beans from falling into
it. They might damage the machine!.
26
Remove the water tank (11) from the machine,
remove its cover (12) and fill it with cold water
(approx. 2.4 l). A valve on the tank bottom
prevents water from escaping.
Before installing the water tank in
the machine, make sure the coffee
bean container cover is properly
fitted.
Install the water tank, slightly pressing over it to
fit the valve which will open automatically.
Replace the cover on the tank.
Do not fill the tank with an excessive quantity
of water.
Always fill the tank with fresh water: h o t
water as well as other fluids might damage the
tank.
0339.951 ed. 01 10/00 ING (UL)
4
DRAINAGE
Do not switch on the machine if the water tank is
empty. Before using the machine make sure there is
enough water in the tank.
Connect the plug to the socket and press the
main switch.
The display shows
"WARMING UP...... "
Should
"ENERGY SAVING
"
(1/2) be displayed, press the Energy saving
switch to disactivate the MENU' mode.
Drainage
Direct the steam/hot water dispensing tube (7)
over the drip tray (2). Place a cup or another
suitable container under the dispensing tube, then
turn the steam/hot water knob (9) counterclockwise.
The pump starts automatically. Wait until a regular
water jet is obtained, then close the knob. The
machine is now drained and ready to work.
The display shows:
"SELECT PRODUCT
"
"READY FOR USE
"
Important: It is advisable to drain the machine
before the first start, after a prolonged period the
machine has not been used or whenever the
water tank has been completely emptied.
Furthermore, should the pump be defective, the
display shows
"VENTILATE
"
"FILL WATERTANK
"
36
Programming
the coffee machine
27
In order to enter the programming mode press the
MENU' key when the machine is on. Keep it
pressed until the first two lines of the programming
mode are displayed:
At the end of the line appears a blinking asterisk,
which can be moved up and down with the keys
(tall and regular coffee).
The display shows the following items in this
sequence:
ENERGY SAVING
PREBREWING
RINSING
PREGRINDING
LANGUAGE
PROGR. HOT WATER
WATER HARDNESS
TOTAL COFFEE
CUP HEATER
DESCALING
TEMP. L. COFFEE
SIGNAL. DESCAL.
TEMP. COFFEE
TIMER
TEMP. S. COFFEE
RINSING CYCLE
Press ESC (espresso coffee) in order to exit the
menu. The machine is now in normal mode.
Selecting menu items
Select the different menu items by means of the
keys
. The key MENU' allows you to
activate the selected item. In a menu item, it is
possible to modify the setting by using the keys
. The key MENU' allows you to memorise
the selected setting.
11-12-2000, 18:06
SELECTING THE LANGUAGE
Energy saving
Move the asterisk to the menu item ENERGY
SAVING using the keys
and press
MENU' to activate it. The machine is now in the
Energy saving mode. Press the MENU' key in
order to go back to the normal mode.
Rinsing cycle function
If the rinsing cycle function is activated, the
machine that is started after a period of inactivity
starts a water rinsing cycle to the coffee dispensing
units automatically.
Move the asterisk to the menu item RINSING
CYCLE using the keys
and press MENU'
to activate it.
The display shows:
"RINSING
"
"ON
"
You can modify the chosen item with the key
: on, off.
Selecting the language
Move the asterisk to the menu item LANGUAGE
using the keys
and press MENU to activate
it. The display shows:
"LANGUAGE
"
"ENGLISH
"
The keys
allow you to change the set
options: italiano, français, Deutsch,
neerlandais,português, español, english.
Hide quick links:
Advertisement
Table of Contents
