Practical Cooking Advice - Hotpoint SX 1038LS P 0 X Operating Instructions Manual

1. Press the icon and repeat steps 1 to 3 as described for the duration
setting.
2. Then press the icon and set the end time using the " " and " " icons.
3. Once you have reached the desired end time, press the
4. Press the button to activate the programmed mode.
The and icons will flash alternately to indicate that programming
has taken place; in the time before cooking starts, the TIME display will show
the duration and the cooking end time alternately.
5. Once cooking has finished, "END" appears on the TEMPERATURE display
and a buzzer sounds.
• For example: it is 9:00 a.m. and a time of 1 hour and 15 minutes is
programmed, while the end time is set to 12:30. The programme will
start automatically at 11:15 a.m.
To cancel programming press the

Practical cooking advice

! Do not place racks in position 1 and 5 during fan-assisted cooking. This is
because excessive direct heat can burn temperature sensitive foods.
! In the GRILL and FAN GRILLING cooking modes, particularly when using
the rotisserie spit, place the dripping pan in position 1 to collect cooking
residues (fat and/or grease).
MULTILEVEL
• Use positions 2 and 4, placing the food which requires more heat on 2.
• Place the dripping pan on the bottom and the rack on top.
GRILL
• Place the rack in position 3 or 4. Position the food in the centre of the rack.
• We recommend that the temperature is set to its maximum level. The top
heating element is regulated by a thermostat and may not always operate
constantly.
PIZZA
• Use a lightweight aluminium pizza pan. Place it on the rack provided.
For a crispy crust, do not use the dripping pan as this extends the total
cooking duration and prevents the crust from forming.
• If the pizza has a lot of toppings, we recommend adding the mozzarella
cheese to the top of the pizza halfway through the cooking process.
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
icon again.
icon.
GB
9