Table of Contents
Advertisement
Once the automatic cleaning cycle is over
GB
Before you can open the oven door, you will have to wait for the
switch off: this indicates the oven temperature has dropped to an acceptable
level. You will notice some white dust deposits on the bottom and the sides
of your oven; remove these deposits with a damp sponge once the oven
has cooled down completely. Alternatively, you can make use of the already
heated oven, in which case it is not necessary to remove the deposits, they
are completely harmless and will not affect your food in any way.
Troubleshooting
Problem
The "Clock button" and the digits on the
display flash.
A programmed cooking mode does not
start.
Only the high luminosity "Clock button"
is lit.
An automatic mode has been selected.
"Hot" appears on the
display and
cooking does not start.
Fan-assisted cooking has been
selected and the food looks burnt.
Do not place
GB
or rest anything
on the open door
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
14
icon to
Possible causes
The appliance has just been connected to the
electricity mains or there has been a blackout.
There has been a blackout.
The appliance is in
standby mode.
The temperature inside the oven is higher
than the suggested value for the selected
mode.
Positions 1 and 5: the direct heat could cause
temperature-sensitive foods to burn.
NOTICE
Make sure that the racks
and dripping pans have been
inserted fully before closing the door
Solution
Set the clock.
Reprogram the cooking mode.
Press any button to exit standby mode.
Wait for the oven to cool down.
We recommend switching dripping pan
positions halfway through cooking.
Please read the manual
carefully for information
regarding the automatic
cleaning (pyrolytic) cycle
Advertisement
Table of Contents
