Precaution when replacing the CAP
Please apply the adhesive agent to the BUTTON BASE (PLAY) when replacing the CAP (PLAY) or CAP (FUNC) or CAP (AMS).
Please apply the adhesive agent to the BUTTON BASE (POWER) when replacing the CAP (POWER).
CAP (FUNC)
CAP (AMS)
CAP (PLAY)
JACK board
BUTTON BASE
(PLAY)
CAP (POWER)
BUTTON BASE (POWER)
wire (flat type)
13core (CNP802)
six screws (+BVTP 2.6)
HCD-DZ3K
SW board
two screws
(+BVTP 2.6)
connector (CNP801)
7