Hide thumbs Also See for HCD-DZ7T:
Table of Contents

Advertisement

Quick Links

QQ
3 7 63 1515 0

SERVICE MANUAL

Ver. 1.1 2007.06
HCD-DZ7T is the amplifier, DVD/CD
and tuner section in DAV-DZ7T.
This system incorporates with Dolby* Digital and Dolby Pro Logic (II)
adaptive matrix surround decoder and the DTS** Digital Surround System.
* Manufactured under license from Dolby Laboratories.
"Dolby", "Pro Logic", and the double-D symbol are trademarks of
Dolby Laboratories.
** Manufactured under license from DTS, Inc.
"DTS" and "DTS Digital Surround" are registered trademarks of DTS,
Inc.
TE
L 13942296513
Amplifier section
Stereo mode (rated)
Surround mode (reference) RMS output power
* Depending on the sound field settings and the source,
there may be no sound output.
Inputs (Analog)
TV (AUDIO IN)
SAT/CABLE (AUDIO IN)Sensitivity: 450/250 mV
AUDIO IN/MIC 1
MIC 2
Inputs (Digital)
SAT/CABLE (COAXIAL IN/OPTICAL IN)
www
.
Sony Corporation
9-887-704-02
Home Audio Division
2007F16-1
Published by Sony Techno Create Corporation
© 2007.06
http://www.xiaoyu163.com
DVD system
108 W + 108 W (at 3 ohms,
Laser
1 kHz, 1 % THD)
FL/FR/SL/SR*: 143 watts
(per channel at 3 ohms, 1
kHz, 10 % THD)
Signal format system
C*: 142 watts (at 3 ohms, 1
Mexican and Latin American models:
kHz, 10 % THD)
Subwoofer L/Subwoofer
Other models:
R*: 143 watts (per channel
Tuner section
at 3 ohms, 80 Hz, 10 %
System
THD)
FM tuner section
Tuning range
Antenna (aerial)
Sensitivity: 450/250 mV
Antenna (aerial) terminals 75 ohms, unbalanced
Intermediate frequency
Sensitivity:
AM tuner section
AUDIO IN 250/125 mV/
Tuning range
MIC 1 1 mV
Mexican, and Latin American models:
Sensitivity: 1 mV
Impedance: 75 ohms/–
x
ao
u163
y
i
http://www.xiaoyu163.com
HCD-DZ7T
2 9
8
Model Name Using Similar Mechanism
Mechanism Type
Optical Pick-up Name
Q Q
3
6 7
1 3
1 5
SPECIFICATIONS
Semiconductor laser
(DVD: λ = 650 nm)
(CD: λ = 790 nm)
Emission duration:
continuous
NTSC
NTSC/PAL
PLL quartz-locked digital
synthesizer
87.5-108.0 MHz (50 kHz
step)
FM wire antenna (aerial)
10.7 MHz
530 – 1,710 kHz (with the
interval set at 10 kHz)
531 – 1,710 kHz (with the
interval set at 9 kHz)
co
.
9 4
2 8
E Model
HCD-DZ150K
CDM85-DVBU102
KHM-313CAA
0 5
8
2 9
9 4
2 8
Other models:
531 – 1,602 kHz (with the
interval set at 9 kHz)
530 – 1,610 kHz (with the
interval set at 10 kHz)
Antenna (aerial)
AM loop antenna (aerial)
Intermediate frequency
450 kHz
Video section
Outputs
VIDEO: 1 Vp-p 75 ohms
S VIDEO:
Y: 1 Vp-p 75 ohms
C: 0.286 Vp-p 75 ohms
COMPONENT:
Y: 1 Vp-p 75 ohms
P
/C
, P
B
B
R
75 ohms
HDMI OUT: Type A (19
pin)
Inputs
VIDEO: 1 Vp-p 75 ohms
General
Power requirements
Mexican models:
120 V AC, 60 Hz
Latin American models:
110 - 240 V AC, 50/60 Hz
Other models:
220 - 240 V AC, 50/60 Hz
— Continued on next page —
m
DVD RECEIVER
9 9
9 9
/C
: 0.7 Vp-p
R

Advertisement

Table of Contents
loading

Summary of Contents for Sony HCD-DZ7T

  • Page 1: Service Manual

    HCD-DZ7T 3 7 63 1515 0 SERVICE MANUAL E Model Ver. 1.1 2007.06 HCD-DZ7T is the amplifier, DVD/CD and tuner section in DAV-DZ7T. This system incorporates with Dolby* Digital and Dolby Pro Logic (II) Model Name Using Similar Mechanism HCD-DZ150K adaptive matrix surround decoder and the DTS** Digital Surround System.
  • Page 2 WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. L 13942296513 REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE MODEL IDENTIFICATION PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR – Rear Panel –...
  • Page 3 [VER.X.XX] (X is a number) may appear on the TV screen. Although this is not a malfunction and for Sony service use only, normal system operation will not be possible. Turn off the system, and then turn on the system again to operate.
  • Page 4: Table Of Contents

    HCD-DZ7T 3 7 63 1515 0 TABLE OF CONTENTS SERVICING NOTE 6-7. Schematic Diagram – MAIN Board (1/10) – ....38 ........... 5 6-8. Schematic Diagram – MAIN Board (2/10) – ....39 6-9. Schematic Diagram – MAIN Board (3/10) – ....40 GENERAL ..............
  • Page 5: Servicing Note

    HCD-DZ7T SECTION 1 3 7 63 1515 0 SERVICING NOTE This System Can Play the NOTES ON HANDLING THE OPTICAL PICK-UP BLOCK OR BASE UNIT Following Discs The laser diode in the optical pick-up block may suffer electrostatic Format of...
  • Page 6 HCD-DZ7T 3 7 63 1515 0 Notes about CD-R/CD-RW/DVD-R/DVD-RW/DVD+R/ DVD+RW In some cases, CD-R/CD-RW/DVD-R/DVD-RW/DVD+R/ DVD+RW cannot be played on this system due to the recording quality or physical condition of the disc, or the characteristics of the recording device and authoring software.
  • Page 7 HCD-DZ7T Ver. 1.1 3 7 63 1515 0 Discharge the charged electricity in capacitors to prevent electric shock as follows When disassembling the machine, be sure to discharge the charged electricity in the following capacitors. Use a resistor of 800 ohms, 2 Watts for discharging the following capacitors.
  • Page 8 Parts that require fixing using adhesive agent The following parts on the POWER board must be fixed by using the adhesive agent (such as Sony Bond Master) as it is specified by Safety Regulations. When any part or printed circuit board is replaced during repair work, be sure to confirm that the following capacitors and resistors are fixed by using the adhesive agent (such as Sony Bond Master) without fail.
  • Page 9 HCD-DZ7T 3 7 63 1515 0 Precaution when installing a new OP unit / Note on replacement of C803, C802, L801, Precaution before unsoldering the static electricity and L802 prevention solder bridge Please fold in the directtion of the arrow and set up at replacement of C803, C802, L801, and L802 on FL board.
  • Page 10 HCD-DZ7T 3 7 63 1515 0 The wire (12P) that ties CN906 (POWER board) to CN506 (MAIN board) Twist 1.5 circles and connect to CN906 fix wire 12P with LP as shown below. (Must keep wire 12P away from the HEAT SINK, and can not touch it.)
  • Page 11: General

    HCD-DZ7T SECTION 2 3 7 63 1515 0 GENERAL This section is extracted from instruction manual. Front panel A "/1 (on/standby) (26) G VOLUME control (26) B A (open/close) (26) H MIC 2 jack (62) C Disc operation (26) I AUDIO IN/MIC 1/A.CAL MIC jack (15, 24,...
  • Page 12 HCD-DZ7T 3 7 63 1515 0 Front panel display About the indications in the front panel display A Lights up when the HDMI OUT jack is J Current repeat mode (39) correctly connected to HDCP (high- K Lights up when the child lock function bandwidth digital content protection) is set to on.
  • Page 13: Remote Control

    HCD-DZ7T 3 7 63 1515 0 Remote control ALPHABETICAL ORDER BUTTON DESCRIPTIONS [/1 (on/standby) 1 (15, 18, 26, A – O P – Z 35, 57) ANGLE 4 (45) PICTURE NAVI qk (35, 60) TV [/1 (on/standby) ra (59) AUDIO** ej (40) PRESET +/–...
  • Page 14: Disassembly

    HCD-DZ7T SECTION 3 3 7 63 1515 0 DISASSEMBLY 3-1. DISASSEMBLY FLOW • This set can be disassembled in the order shown below. 3-2. CASE (DS), FRONT PANEL ASSY (Page 15) 3-9. SP BOARD, 3-11. DVD MECHANISM DECK 3-3. FL BOARD 3-6.
  • Page 15: Case (Ds), Front Panel Assy

    HCD-DZ7T 3 7 63 1515 0 Note: Follow the disassembly procedure in the numerical order given. 3-2. CASE (DS), FRONT PANEL ASSY 5 two screws (CASE 3 × 8 TP2) Route the harness as shown below. harness 7 five screws (+BVTP 3 ×...
  • Page 16: Fl Board

    HCD-DZ7T 3 7 63 1515 0 3-3. FL BOARD 7 wire (flat type) 21core (CN801) 6 wire (flat type) 13core (CN805) 8 FL board 5 two screws (+BVTP 2.6 × 10) 4 shield plate (FR) 3 five screws (+BVTP 2.6 × 10)
  • Page 17: Jack Board, P-Sw Board

    HCD-DZ7T 3 7 63 1515 0 3-4. JACK BOARD, P-SW BOARD 7 button (base) q; P- SW board 6 screw (+BVTP 2.6 × 10 ) 9 harness 1 knob (vol) 2 nut 4 button (base) 5 wire (flat type)
  • Page 18: Tuner (Fm/Am)

    HCD-DZ7T 3 7 63 1515 0 3-6. TUNER (FM/AM) 3 tuner (FM/AM) 1 two screws 2 wire (flat type) 9core (+BVTT 2.6 × 6 ) L 13942296513 3-7. POWER BOARD 1 connector Clamp the harnesses with a 4p (CN3002)
  • Page 19: Io-S-Out Board

    HCD-DZ7T 3 7 63 1515 0 3-8. IO-S-OUT BOARD 6 three screws (+BV 3 × 6 ) 7 IO-S-OUT board 5 six screws (+BVTP 3 × 8 ) 4 connector 5p (CN302) 2 wire (flat type) 21core (CN311) 3 wire (flat type)
  • Page 20: Main Board, Dsp Board

    HCD-DZ7T 3 7 63 1515 0 3-10. MAIN BOARD, DSP BOARD 6 screw (+BVTP 3 × 12) 5 two screws (+BV 3 × 10) 7 heatsink (AMP), Attaching the two radiation sheets HEATSINK B board, on the IC MAIN board first, and then HEATSINK A board attach the heatsink (AMP).
  • Page 21: Dvd Mechanism Deck (Cdm85-Dvbu102)

    HCD-DZ7T 3 7 63 1515 0 3-11. DVD MECHANISM DECK (CDM85-DVBU102) 1 wire (flat type) 9 three screws (+BV 3 × 6) 2 unweaved 5core (CN307) cloth q; cover (MD) 3 Remove the wire. 8 Remove the wire and harnesses.
  • Page 22: Belt, Ms-203 Board

    HCD-DZ7T 3 7 63 1515 0 3-13. BELT, MS-203 BOARD 2 chuck cam 3 belt 4 screw (M 1.7 × 2.5) 1 two claws 7 MS-203 board L 13942296513 6 DC motor 5 three claws u163 http://www.xiaoyu163.com...
  • Page 23: Optical Pick-Up (Khm-313Caa)

    HCD-DZ7T 3 7 63 1515 0 3-14. OPTICAL PICK-UP (KHM-313CAA) 3 two claws 2 chuck cam 1 two claws 4 base unit L 13942296513 8 two insulators 6 four insulator screws 9 two insulators 0 optical pick-up (KHM-313CAA) 5 two claws...
  • Page 24: Test Mode

    HCD-DZ7T SECTION 4 3 7 63 1515 0 TEST MODE 3. Disc Tray Lock Note: Incorrect operations may be performed if the test mode is not The disc tray lock function for the antitheft of an demonstration entered properly.
  • Page 25 HCD-DZ7T Ver. 1.1 3 7 63 1515 0 8. Volume Test 10. Automatic Acoustic Field Calibration Microphone Test Mode Procedure: 1. Press the button to turn the power on. Procedure: 2. Press three buttons . , H and > simultaneously.
  • Page 26 HCD-DZ7T 3 7 63 1515 0 (2) Select “2. Drive Manual Operation” by pressing the 2 button DVD SECTION on the remote commander. The screen will appear as shown. 12-1. General Description Drive Manual Operation The IOP measurement allows you to make diagnosis and adjustment 1.
  • Page 27 HCD-DZ7T 3 7 63 1515 0 12-4. Emergency History 52: Open kick spindle error To check the emergency history, please follow the following 51: Spindle stop error procedure. 60: Focus on error 61: Seek fail error (1) From the Top Menu of Remocon Diagnosis Menu, select “3.
  • Page 28 HCD-DZ7T 3 7 63 1515 0 12-4-4. Return to the Top Menu of Remocon Diagnosis Menu Press 0 button on the remote commander. • Check Version Information To check the version information, please follow the following procedure. (1) From the Top Menu of Remocon Diagnosis Menu, select “4.
  • Page 29: Electrical Adjustment

    HCD-DZ7T SECTION 5 3 7 63 1515 0 ELECTRICAL ADJUSTMENT DVD SECTION When the optical pick-up assy is replaced, perform the “Executing IOP Measurement”. Executing IOP Measurement (See page 26) TUNER SECTION [FM Tune Level Check] generator OUT (75 Ω ) Procedure: 1.
  • Page 30: Diagrams

    HCD-DZ7T Ver. 1.1 SECTION 6 3 7 63 1515 0 DIAGRAMS THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS. (In addition to this, the necessary note is printed in each block.) For Schematic Diagrams. For Printed Wiring Boards.
  • Page 31 http://www.xiaoyu163.com 3 7 63 1515 0 L 13942296513 u163 http://www.xiaoyu163.com...
  • Page 32: Block Diagram - Rf/Video Section

    http://www.xiaoyu163.com 3 7 63 1515 0 L 13942296513 u163 http://www.xiaoyu163.com...
  • Page 33: Block Diagram - Amp Section

    http://www.xiaoyu163.com 3 7 63 1515 0 L 13942296513 u163 http://www.xiaoyu163.com...
  • Page 34: Block Diagram - Audio Section

    http://www.xiaoyu163.com 3 7 63 1515 0 L 13942296513 u163 http://www.xiaoyu163.com...
  • Page 35: Block Diagram - Power Section

    http://www.xiaoyu163.com 3 7 63 1515 0 L 13942296513 u163 http://www.xiaoyu163.com...
  • Page 36: Printed Wiring Board - Main Board (Side A)

    http://www.xiaoyu163.com 3 7 63 1515 0 L 13942296513 u163 http://www.xiaoyu163.com...
  • Page 37: Printed Wiring Board - Main Board (Side B)

    http://www.xiaoyu163.com 3 7 63 1515 0 R726 C775 C722 L 13942296513 u163 http://www.xiaoyu163.com...
  • Page 38: Schematic Diagram - Main Board (1/10)

    http://www.xiaoyu163.com 3 7 63 1515 0 L 13942296513 u163 http://www.xiaoyu163.com...
  • Page 39: Schematic Diagram - Main Board (2/10)

    http://www.xiaoyu163.com 3 7 63 1515 0 L 13942296513 u163 http://www.xiaoyu163.com...
  • Page 40: Schematic Diagram - Main Board (3/10)

    http://www.xiaoyu163.com 3 7 63 1515 0 L 13942296513 u163 http://www.xiaoyu163.com...
  • Page 41: Schematic Diagram - Main Board (4/10)

    http://www.xiaoyu163.com 3 7 63 1515 0 L 13942296513 u163 http://www.xiaoyu163.com...
  • Page 42: Schematic Diagram - Main Board (5/10)

    http://www.xiaoyu163.com 3 7 63 1515 0 L 13942296513 IC3903 IC3904 IC3901 IC3902 TC7WH157FK(TE85R) TC7WH157FK(TE85R) TC7WH157FK(TE85R) TC7WH157FK(TE85R) u163 http://www.xiaoyu163.com...
  • Page 43: Schematic Diagram - Main Board (6/10)

    http://www.xiaoyu163.com 3 7 63 1515 0 16.5 L 13942296513 u163 http://www.xiaoyu163.com...
  • Page 44: Schematic Diagram - Main Board (7/10)

    http://www.xiaoyu163.com 3 7 63 1515 0 L 13942296513 u163 http://www.xiaoyu163.com...
  • Page 45: Schematic Diagram - Main Board (8/10)

    http://www.xiaoyu163.com 3 7 63 1515 0 L 13942296513 u163 http://www.xiaoyu163.com...
  • Page 46: Schematic Diagram - Main Board (9/10)

    http://www.xiaoyu163.com 3 7 63 1515 0 L 13942296513 u163 http://www.xiaoyu163.com...
  • Page 47: Schematic Diagram - Main Board (10/10)

    http://www.xiaoyu163.com 3 7 63 1515 0 L 13942296513 u163 http://www.xiaoyu163.com...
  • Page 48: Printed Wiring Board - Io-S-Out Board

    http://www.xiaoyu163.com 3 7 63 1515 0 L 13942296513 u163 http://www.xiaoyu163.com...
  • Page 49: Schematic Diagram - Io-S-Out Board (1/2)

    http://www.xiaoyu163.com 3 7 63 1515 0 L 13942296513 u163 http://www.xiaoyu163.com...
  • Page 50: Schematic Diagram - Io-S-Out Board (2/2)

    http://www.xiaoyu163.com 3 7 63 1515 0 L 13942296513 u163 http://www.xiaoyu163.com...
  • Page 51: Printed Wiring Board - Dsp Board

    http://www.xiaoyu163.com 3 7 63 1515 0 L 13942296513 u163 http://www.xiaoyu163.com...
  • Page 52: Schematic Diagram - Dsp Board

    http://www.xiaoyu163.com 3 7 63 1515 0 L 13942296513 u163 http://www.xiaoyu163.com...
  • Page 53: Printed Wiring Boards - Fl, Jack Board

    http://www.xiaoyu163.com 3 7 63 1515 0 L 13942296513 u163 http://www.xiaoyu163.com...
  • Page 54: Schematic Diagram - Fl Board

    http://www.xiaoyu163.com 3 7 63 1515 0 L 13942296513 u163 http://www.xiaoyu163.com...
  • Page 55: Schematic Diagram - Jack Board

    http://www.xiaoyu163.com 3 7 63 1515 0 L 13942296513 u163 http://www.xiaoyu163.com...
  • Page 56: Printed Wiring Boards - Sp Board, P-Sw Board

    http://www.xiaoyu163.com 3 7 63 1515 0 L 13942296513 u163 http://www.xiaoyu163.com...
  • Page 57: Printed Wiring Board - Ms-203 Board

    http://www.xiaoyu163.com 3 7 63 1515 0 L 13942296513 u163 http://www.xiaoyu163.com...
  • Page 58: Printed Wiring Board - Power Board

    http://www.xiaoyu163.com 3 7 63 1515 0 L 13942296513 u163 http://www.xiaoyu163.com...
  • Page 59: Schematic Diagram - Power Board

    http://www.xiaoyu163.com 3 7 63 1515 0 L 13942296513 u163 http://www.xiaoyu163.com...
  • Page 60 http://www.xiaoyu163.com 3 7 63 1515 0 L 13942296513 u163 http://www.xiaoyu163.com...
  • Page 61 HCD-DZ7T 3 7 63 1515 0 – MAIN Board – IC772 PCM1808PWR LRCK Serial Interface DOUT Mode/ Format Control Clock Timing SCKI Control × 1/64 Decimation Filter with HighúPass Filter DGND DeltaúSigma DeltaúSigma Modulator Modulator Power Supply Antialias AGND...
  • Page 62 HCD-DZ7T 3 7 63 1515 0 – MAIN Board – IC3100, IC3150, IC3200, IC3250, IC3300, IC3400, IC3500 CXD9883M BST_A PVDD_A Over Current Fault GVDD_A PVDD_A /OTW PVDD_A VREG Gate Drive /HIZ_HS_A PGND /HIZ_LS_A Stuck Detect /RESET PGND Protection Logic...
  • Page 63 HCD-DZ7T Ver. 1.1 3 7 63 1515 0 – IO-S-OUT Board – IC309 MM1228XFBE IC308 MM1758AFBE VIN1 S-DC OUT 28 VCC2 S1/S2 VOUT 27 S-DC OUT 150k VCC1 BIAS VIN2 6.75MHz DRIVER LOW-PASS BIAS C IN 26 C OUT...
  • Page 64 HCD-DZ7T 3 7 63 1515 0 – DSP Board – IC782 74LVC1G79GW-125 – FL Board – IC802 PT6315 L 13942296513 Grid driver Multiplexed driver SEG19/GRID10 Command decoder LED1 SEG18/GRID11 LED2 Display memory LED3 SEG17/GRID12 24 bits x 12 words...
  • Page 65 HCD-DZ7T Ver. 1.1 3 7 63 1515 0 – POWER Board – IC901 STR-F6138-LF1352 (MX) FB/OLP Reg2 Drain UVL0 Delay POWER ON=16V – MOS FET OFF=10.5V Delay Reg1 IOLP Latch Internal S/GND – Bias OCP1 Volp – Vocp INH1 –...
  • Page 66 HCD-DZ7T 3 7 63 1515 0 • IC Pin Function Description MAIN BOARD IC1101 CXD9889R (CD/DVD RF AMP, FOCUS/TRACKING ERROR AMP, DVD SYSTEM PROCESSOR, DIGTAL SERVO PROCESSOR) Pin No. Pin Name Description AGND — Ground terminal DVDA AC coupled input path A...
  • Page 67 HCD-DZ7T 3 7 63 1515 0 Pin No. Pin Name Description RESERVED — Not used (Open) USB_VDD3 — Power supply (SW+3.3V) SPFG Spindle FG input DVD/CD switch (H:DVD / L:CD) CKSW CKSW input OCSW OCSW input EEWP EEPROM Write Protect control (L:Write allowed) DVDD18 —...
  • Page 68 HCD-DZ7T 3 7 63 1515 0 Pin No. Pin Name Description Write enable output to SDRAM (IC1104) Column address strobe output to SDRAM (IC1104) Row address strobe output to SDRAM (IC1104) Chip select output to SDRAM (IC1104) 137, 138...
  • Page 69 HCD-DZ7T 3 7 63 1515 0 Pin No. Pin Name Description SCORE Calculation of SCORE XVOICE Detection of MIC signal (H:Voice exist / L:Voice is absence) Fixed_Low — Not used (Open) ASDATA1 Not used (Open) ASDATA2 Not used (Open) Fixed_Low —...
  • Page 70 HCD-DZ7T 3 7 63 1515 0 Pin No. Pin Name Description RFRPAC RF ripple detect input (through AC-coupling) HRFZC High frequency RF ripple zero crossing CRTPLP Defect level filter capacitor connecting RFGND — Ground terminal RF offset cancellation capacitor connecting...
  • Page 71 HCD-DZ7T 3 7 63 1515 0 MAIN BOARD IC501 M30626MHP-A69FPU0 (SYSTEM CONTROLLER) Pin No. Pin Name Description DAMP_SCD/ DAMP processor data output, DIAT serial data output, DIR data output DIAT_SDATA/DIR_DIN DAMP_SHIFT/ DAMP processor clock output, DIAT serial clock output, DIR clock output...
  • Page 72 HCD-DZ7T 3 7 63 1515 0 Pin No. Pin Name Description DAMP_LATCH2 DAMP processor latch2 DAMP_LATCH3 DAMP processor latch3 DAMP_INIT DAMP processor reset DAMP_SOFT_MUTE DAMP processor soft muting MIC2_SW MIC2 insert switch HP_MUTE Not used (Open) DSP_SPIDS DSP device select output...
  • Page 73 HCD-DZ7T 3 7 63 1515 0 Pin No. Pin Name Description KEY0 Key input 0 input Vref — Reference voltage (BUP+3.3V) AVCC — Power supply (BUP+3.3V) DIR_HDOUT DIR data input L 13942296513 u163 http://www.xiaoyu163.com...
  • Page 74 HCD-DZ7T 3 7 63 1515 0 MAIN BOARD IC1701 CXD9873Q (HDMI DRIVE) Pin No. Pin Name Description DVSS — Ground terminal (digital system) 2 to 9 C0 to C7 Not used (Fixed to “L”) DVDD33 — Power supply terminal (+3.3V) (digital system)
  • Page 75 HCD-DZ7T 3 7 63 1515 0 Pin No. Pin Name Description Not used (Open) AVSS — Ground terminal (analog system) (for D/A converter) Not used (Open) Not used (Open) SPDIF SPDIF digital audio signal input from the servo DSP...
  • Page 76 HCD-DZ7T 3 7 63 1515 0 DSP BOARD IC002 ADSST-AVR-1115 (DIGITAL AUDIO PROCESSOR) Pin No. Pin Name Description VDDINT — Power supply terminal (+1.2V) (for core) Core instruction rate to CLKIN (pin 142) ratio selection signal input terminal CLKCFG0 Fixed at “L”...
  • Page 77 HCD-DZ7T 3 7 63 1515 0 Pin No. Pin Name Description VDDEXT — Power supply terminal (+3.3V) (for I/O) VDDINT — Power supply terminal (+1.2V) (for core) — Ground terminal PF_CE — Not used (Open) SPI_MAS Master/slave selection signal output terminal “L”: DSP is master...
  • Page 78 HCD-DZ7T 3 7 63 1515 0 Pin No. Pin Name Description — Ground terminal VDDINT — Power supply terminal (+1.2V) (for core) — Ground terminal VDDEXT — Power supply terminal (+3.3V) (for I/O) — Ground terminal VDDINT — Power supply terminal (+1.2V) (for core) —...
  • Page 79: Exploded Views

    HCD-DZ7T Ver. 1.1 SECTION 7 3 7 63 1515 0 EXPLODED VIEWS NOTE: • -XX and -X mean standardized parts, so they • The mechanical parts with no reference The components identified by mark 0 or may have some difference from the original number in the exploded views are not supplied.
  • Page 80: Q Q 7-2. Front Panel Section

    HCD-DZ7T Ver. 1.1 3 7 63 1515 0 7-2. FRONT PANEL SECTION supplied supplied supplied supplied L 13942296513 supplied including S800 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 2-889-990-01 KNOB (VOL) 3-087-053-11 +BVTP2.6 (3CR)
  • Page 81: Chassis Section

    HCD-DZ7T Ver. 1.1 3 7 63 1515 0 7-3. CHASSIS SECTION supplied supplied supplied supplied supplied supplied supplied L 13942296513 supplied DVD mechanism deck section F901 (CDM85-DVBU102) not supplied not supplied Ref. No. Part No. Description Remark Ref. No.
  • Page 82: Dvd Mechanism Deck Section (Cdm85-Dvbu102)

    HCD-DZ7T 3 7 63 1515 0 7-4. DVD MECHANISM DECK SECTION (CDM85-DVBU102) not supplied not supplied not supplied not supplied not supplied not supplied not supplied not supplied L 13942296513 supplied Ref. No. Part No. Description Remark Ref. No.
  • Page 83: Electrical Parts List

    HCD-DZ7T Ver. 1.1 SECTION 8 3 7 63 1515 0 ELECTRICAL PARTS LIST NOTE: • Due to standardization, replacements in the • RESISTORS When indicating parts by reference number, parts list may be different from the parts All resistors are in ohms.
  • Page 84 HCD-DZ7T Ver. 1.1 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R004 1-216-801-11 METAL CHIP 1/10W < VIBRATOR > R005 1-216-801-11 METAL CHIP 1/10W 1-795-807-11 VIBRATOR, CRYSTAL(25MHz) R006 1-216-801-11 METAL CHIP...
  • Page 85 1-107-826-11 CERAMIC CHIP 0.1uF < IC > u163 C349 1-126-933-11 ELECT 100uF C350 1-107-826-11 CERAMIC CHIP 0.1uF IC300 6-706-078-01 IC M62429FP-TP C351 1-126-933-11 ELECT 100uF IC301 6-600-466-01 IC TORX147L (SONY) (OPTICAL) C352 1-107-826-11 CERAMIC CHIP 0.1uF IC302 6-706-492-01 IC TC7SHU04FU (T5RSOJF) http://www.xiaoyu163.com...
  • Page 86 HCD-DZ7T IO-S-OUT 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark IC303 8-759-385-76 IC MC14052 BDR2 R339 1-218-285-11 METAL CHIP 1/10W IC304 8-759-385-76 IC MC14052 BDR2 R340 1-216-833-11 METAL CHIP 1/10W...
  • Page 87 HCD-DZ7T Ver. 1.1 IO-S-OUT JACK 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < IC > R417 1-216-829-11 METAL CHIP 4.7K 1/10W R420 1-216-817-11 METAL CHIP 1/10W IC401 8-759-100-96 IC uPC4558G2...
  • Page 88 HCD-DZ7T Ver. 1.1 JACK MAIN 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R853 1-216-827-11 METAL CHIP 3.3K 1/10W R854 1-216-825-11 METAL CHIP 2.2K 1/10W C519 1-107-826-11 CERAMIC CHIP 0.1uF...
  • Page 89 HCD-DZ7T MAIN 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C1125 1-107-826-11 CERAMIC CHIP 0.1uF C1126 1-107-826-11 CERAMIC CHIP 0.1uF C1199 1-162-968-11 CERAMIC CHIP 0.0047uF 10% C1127 1-162-970-11 CERAMIC CHIP 0.01uF...
  • Page 90 HCD-DZ7T MAIN 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C2114 1-162-970-11 CERAMIC CHIP 0.01uF C2130 1-162-970-11 CERAMIC CHIP 0.01uF C3108 1-104-329-11 CERAMIC CHIP 0.1uF C3000 1-126-382-11 ELECT 100uF C3109...
  • Page 91 HCD-DZ7T MAIN 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C3265 1-137-198-81 FILM C3266 1-112-831-11 ELECT 2200uF C3903 1-162-964-11 CERAMIC CHIP 0.001uF C3267 1-104-329-11 CERAMIC CHIP 0.1uF C3904 1-162-964-11 CERAMIC CHIP 0.001uF...
  • Page 92 HCD-DZ7T Ver. 1.1 MAIN 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark D9712 6-501-193-01 DIODE 1SS355WTE-17 IC1701 6-708-682-01 IC CXD9873Q < FERRITE BEAD > IC1702 6-702-300-01 IC TK11118CSCL-G IC1703 6-702-302-01 IC TK11133CSCL-G...
  • Page 93 HCD-DZ7T Ver. 1.1 MAIN 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R484 1-216-864-11 SHORT CHIP Q1701 6-550-008-01 TRANSISTOR UM6K1N-TN R487 1-216-809-11 METAL CHIP 1/10W Q3000 8-729-142-48 TRANSISTOR 2SD1616-TP-LK R488...
  • Page 94 HCD-DZ7T MAIN 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R557 1-216-841-11 METAL CHIP 1/10W R645 1-216-809-11 METAL CHIP 1/10W R558 1-216-833-11 METAL CHIP 1/10W R713 1-216-864-11 SHORT CHIP R716...
  • Page 95 HCD-DZ7T MAIN 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R1126 1-216-833-11 METAL CHIP 1/10W R1234 1-216-833-11 METAL CHIP 1/10W R1132 1-216-845-11 METAL CHIP 100K 1/10W R1236 1-216-821-11 METAL CHIP...
  • Page 96 HCD-DZ7T MAIN 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R2103 1-216-864-11 SHORT CHIP R3014 1-216-805-11 METAL CHIP 1/10W R2104 1-216-829-11 METAL CHIP 4.7K 1/10W R3015 1-216-805-11 METAL CHIP 1/10W...
  • Page 97 HCD-DZ7T MAIN 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R3154 1-216-864-11 SHORT CHIP R3554 1-216-845-11 METAL CHIP 100K 1/10W R3157 1-216-835-11 METAL CHIP 1/10W R3555 1-216-864-11 SHORT CHIP R3556 1-216-829-11 METAL CHIP 4.7K...
  • Page 98 HCD-DZ7T Ver. 1.1 MAIN MS-203 POWER 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark RB1107 1-234-371-21 RES, NETWORK 47 (1005X4) 0 C909 1-162-960-11 CERAMIC CHIP 220PF RB1108 1-234-371-21 RES, NETWORK 47 (1005X4)
  • Page 99 HCD-DZ7T Ver. 1.1 POWER 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark IC951 6-707-743-01 IC TA76L431S (TPE6, Q) 0 C980 1-117-828-11 FILM 3300PF 1.5KV (MX) < COIL > C982 1-126-968-11 ELECT...
  • Page 100 HCD-DZ7T Ver. 1.1 POWER P-SW 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 0 R923 1-216-829-11 METAL CHIP 4.7K 1/10W P-SW BOARD *********** 0 R925 1-216-797-11 METAL CHIP 1/10W 0 R926...
  • Page 101 HCD-DZ7T 3 7 63 1515 0 MEMO L 13942296513 u163 http://www.xiaoyu163.com...
  • Page 102 HCD-DZ7T 3 7 63 1515 0 REVISION HISTORY Clicking the version allows you to jump to the revised page. Also, clicking the version at the top of the revised page allows you to jump to the next revised page.

Table of Contents