Supervisor/User Password Setting - MSI MICRO NLX BX4 User Manual

Table of Contents

CHAPTER 3

3.12 Supervisor/User Password Setting

This Main Menu item lets you configure the system so that a pass-

word is required each time the system boots or an attempt is made to enter

the Setup program. Supervisor Password allows you to change all CMOS

settings but the User Password setting doesn't have this function. The way

to set up the passwords for both Supervisor and User are as follow:

1. Choose "Change Password" in the Main Menu and press <Enter>.

The following message appears:

2. The first time you run this option, enter your password up to only 8

characters and press <Enter>. The screen does not display the entered

characters. For no password just press <Enter>.

3. After you enter the password, the following message appears prompting

you to confirm the password:

4. Enter exactly the same password you just typed in to confirm the pass-

word and press <Enter>.

5. Move the cursor to Save & Exit Setup to save the password.

6. If you need to delete the password you entered before, choose the

Supervisor Password and press <Enter>. It will delete the password that

you had before.

7. Move the cursor to Save & Exit Setup to save the option you did. Other-

wise, the old password will still be there when you turn on your machine

next time.

"Enter Password:"

"Confirm Password:"

3-34

AWARD

BIOS SETUP

AWARD

BIOS SETUP

Table of Contents