Sony DVP-PQ2 Service Manual page 15

Changing the viewing angle and subtitles (D)
You can select picture angles if there are multiple pictures (angles) recorded on the
disc, or change subtitle languages in multilingual DVDs.
To Press
change angles ANGLE repeatedly during playback to select the number of the
angle you want to play. (DVD only)
display or SUBTITLE repeatedly to select the subtitle language. (DVD only)
change subtitles (When a 4-digit number is displayed, check the number in the
"Language Code List" on the Brown Side of this manual.)
To cancel the subtitle, press SUBTITLE repeatedly to select
"OFF."
Using the DVD's menu (E)
When a menu is recorded on the DVD, you can usually select items such as the
title, audio language, or subtitles.
To display Press
TOP MENU or MENU. Select an item using B/V/v/b, and
DVD's menu
press ENTER. (DVD only)
TOP MENU: Displays a menu of available movie and music
titles.
MENU: Displays a menu of subtitles and audio languages.
Displaying information on your screen (F)
You can display information such as the playing time or the disc text on the TV
screen.
To return to the normal screen, press DISPLAY repeatedly.
To display Press
time/text DISPLAY during playback. Then press ENTER repeatedly to
switch the display from total playing time to remaining time,
and vice versa. (For details, see "Time display" in the next
section.)
DVD/CD TEXT or MP3 track name will be displayed following
the time display if it is recorded on the disc. (Only the letters of
the alphabet are shown.)
current audio DISPLAY twice during playback. (DVD only)
format
(For details, see "Audio display" in the next section.)
Reading the screen
You can display the time or audio format in the
upper area of the TV screen during playback.
Time display
<Example*>
Current album/title
number
• T: title, A: album
T11 — 8
T 1:01:57
Current chapter/
Time display
track/index number
• D: disc, T: title or track,
C: chapter
• No mark: Playing time
With – : Remaining time
*Here, the disc is playing chapter 8 of the 11th title, which has
been played for 1 hour 1 minute and 57 seconds.
Audio display
<Example*>
Current audio format (Dolby
Digital, DTS, PCM,etc.)
Number of rear
component
DOLBY DIGITAL 3 /2 .1
Number of LFE
Number of front and
(Low Frequency Effect)
center component
component
*Here, the indicated disc's audio format is Dolby Digital
5.1channel (ch).
5.1ch: 3 (Front Left/Right/Center) +
2 (Rear Left/Right) +
0.1 (LFE)
Note
When "DTS" is set to "OFF" in the audio setup
setting, the DTS display will not appear even if the
disc has a DTS signal. (See "Settings and
Adjustments" for details.)
Settings
and
Adjustments
You can select and change the settings of this
player to meet your needs and to suit your
playing environment.
✎
To change the languages used in
subtitles, sound, or on-screen displays.
c
"Language/Screen/Audio Setup"
✎
To adjust the aspect ratio of the picture
to fit your TV.
c
"Language/Screen/Audio Setup"
✎
To select the setting of the audio when
connected to an amplifier.
c
"Language/Screen/Audio Setup"
✎
To set playback limitation levels (such as
to limit violent scenes).
c
"Limiting Playback" (See the
Brown Side of this manual.)