Uninstalling Milk Island - Saeco Milk Island MKI001 Operating Instructions Manual

UNINSTALLING MILK ISLAND

Warning: to disconnect Milk Island, position the coffee machine on its side. Before carrying
out this operation, remove the water tank, drip tray and dregs drawer and empty the coffee
bean hopper.
Turn the coffee machine off and unplug the plug from the socket.
1
Use the original packaging, if
available.
Remove the milk jug from the
base.
4
Re-position the protective cap
in the housing where Milk Island
was installed.
Then wash and sterilise all Milk Island components and place them in a safe place for future installation; if
available, we recommend using the original packaging.
2
After having emptied the
containers, delicately turn the
machine onto one side.
5
At this point, re-position the
coffee machine in its correct
position and put back all its
components.
UNINSTALLING
3
Keeping the button pushed, re-
move the base from the coffee
machine.
6
Turn the coffee machine
on and follow the start-up
procedure as described in
the machine's operating
instructions.
15