Installing Milk Island - Saeco Milk Island MKI001 Operating Instructions Manual

INSTALLATION
12

INSTALLING MILK ISLAND

Warning: to connect Milk Island, position the coffee machine on its side. Before carrying out
this operation, remove the water tank, drip tray and dregs drawer and empty the coffee bean
hopper. Turn the coffee machine off and unplug the plug from the socket.
1
Remove Milk Island from the
packaging; ensure that the
jug is intact. We recommend
keeping the packaging.
4
Push the release button in the
direction indicated.
7
At this point, re-position the
coffee machine in its correct
position and put back all its
containers.
2
After having emptied the
containers, delicately turn the
machine onto one side.
Remove the protective cap
located on the machine.
5
Keeping the button pushed,
connect Milk Island to the coffee
machine by joining the relevant
connectors.
8
Milk Island is automatically
confi gured when the coffee
machine is turned on.
3
Position the cap in the appro-
priate housing.
6
Release the button when the
base has been completely
inserted.
Ensure that the base is firmly
connected to the machine.
9
Position the jug by slightly
rotating it.
Check the colour of the led on
the base. When the led is green,
Milk Island is operating correctly.