Using Milk Island - Saeco Milk Island MKI001 Operating Instructions Manual

USING MILK ISLAND

Warning: before using Milk Island, clean the jug and the other components. Ensure that
all its components have been correctly installed. The glass of the jug can reach very high
temperatures: danger of scalding! Only use Milk Island with water and milk. It is forbidden to use it
with other liquids of any kind or of any chemical composition.
Important note: the quantity of milk in the jug must never be below the "MIN" minimum level
nor exceed the "MAX" maximum level. After having used Milk Island, thoroughly clean all
its components.
To guarantee a better result when preparing a cappuccino, use cold milk (0-8°C). We
recommend using partially skimmed milk.
1
Fill the milk jug with the quantity
of milk desired.
4
Remove the jug using the
handle.
2
Position the milk jug on the
base of Milk Island.
5
After having made slight circular
movements of the jug, pour the
milk into the cup.
Note: when the milk jug is not being used, place the sugar container on the
base. This protects the connection tubes from getting dirty and from accidental
knocking.
OPERATING
3
Position the knob for steam
dispensing to the "Milk
Island" position.
6
Position the cup with frothed milk
under the brew unit.
Dispense coffee in the cup
(see coffee machine operating
instructions).
13