Ignition System; Cutting Attachment - Stihl 088 Owner's Manual

2.3.

Ignition System

2.4

Cutting Attachment

STIHL 088
Type:
Air gap:
Ignition timing:
Spark plug (suppressed):
Electrode gap:
Spark plug thread:
Length of thread:
Heat range:
Guide bars
Bar tail: Bar lengths:
Oilomatic chain:
Chain sprockets:
Chain speed:
Chain lubrication:
Oil delivery rate:
Oil tank capacity:
Electronic magneto ignition
(breakerless) with integral
trigger unit
0.2 - 0.3 mm (0.008-0.012 in)
2.3 - 3.3 mm (0.091-0.130 in)
B.TD.C. at 8,000 rpm
Bosch WSR 6F or
NGK BPMR 7 A
0.5 mm (0.02 in)
M14x1.25
9.5 mm (0.37 in)
200
STIHL Rollomatic
with nose sprocket
STIHL Duromatic with
Stellite-tipped nose.
Both types with corrosion-
resistant finish and induction
hardened rails.
3002
Rollomatic: 53, 63, 75, 90
and 105 cm
(21, 25, 30, 35 and 41 in)
Duromatic: 53, 63, 75, 90, 105,
120 and 150 cm
(21, 25, 30, 35, 47, 59 in)
10.26 mm (0.404")
Rapid-Micro and Rapid-Super
(standard equipment)
9.32 mm (3/8")
Rapid-Micro and Rapid-Super
as well as 12.7 mm (1/2")
Rapid-Standard available
as options
7-tooth 0.404" rim or
spur sprocket
(standard equipment)
8-tooth 3/8" rim and
spur sprockets
23.9 m/s (78.4 ft/sec) at 8,500 rpm
(with 7-tooth 0.404" sprocket)
Fully automatic speed-controlled
reciprocating oil pump,
no oil feed at idle speed.
Additional manual oil flow
control (with E-matic mark)
Adjustable 17 - 38 cm³/min
(0.6 - 1.3 fl.oz/min) at 10,000 rpm
0.70 1 (1.48 US pt)
4