Toyota sienna 2004 Service Manual page 40

Opening operation can be performed by
the switch under the following condi-
tions:
D
The back door is unlocked.
D
The power back door system is on.
(The "BACK DOOR OFF" switch is
pushed out.)
D
The back door is between in the fully−
closed position and half−opened posi-
tion.
D
When the ignition key is in the "ON"
position, the transmission selector lever
must be in "P".
Closing operation can be performed by
the switch under the following condi-
tions:
D
The power back door system is on.
(The "BACK DOOR OFF" switch is
pushed out.)
D
The back door is between in the fully−
opened position and half−opened posi-
tion.
The time of pushing the switches for oper-
ating the back door can be changed. For
details, contact your Toyota dealer.
40
04 SIENNA_U (L/O 0408)
OPERATING WITH THE WIRELESS
REMOTE CONTROL TRANSMITTER
To open or close the door, push the
" " switch on the wireless remote
control transmitter about one second.
(Only when the power back door sys-
tem is on.) For details, see "Wireless
remote control" on page 14 in this Sec-
tion.
ASSISTS CLOSING BY HAND
When the power back door system is on
(the "BACK DOOR OFF" switch is pushed
out), if you move the back door about
10—15 cm (4—6 in.) from its fully−opened
position, the back door will automatically
and completely close.
When the power back door system is off,
the back door can be closed manually.
The assisting function when closing the
back door can be disabled and the assist-
ing function when opening the back door
can be added. For details, contact your
Toyota dealer.
I n f o r ma t i o n P r o v i d e d b y :
JAM PROTECTION FUNCTION
If anything with sufficient resistance ob-
structs the power back door while it is
closing or opening, the back door will au-
tomatically reverse to the opposite direc-
tion.
If the jam protection function operates
continuously at the closing operation more
than 2 times, the back door will be
stopped at that position.
2004 SIENNA from Aug. '04 Prod. (OM45422U)