Greeting Message; Listening To Messages Using The Base Unit - Panasonic KX-TG6051NZ Operating Instructions Manual

Greeting message

When the unit answers a call, callers
are greeted by a greeting message. You
can record your own greeting message
or use a prerecorded greeting
message.
Recording your greeting
message
You can record your own greeting
message (max. 2 minutes). If you do not
record a greeting message, a
prerecorded greeting message is used.
{GREETING REC}
1
2
Within 10 seconds, press
{GREETING REC} again.
3
After the base unit beeps, speak
clearly about 20 cm away from the
MIC.
To stop recording, press {STOP}.
4
Using a prerecorded greeting
message
If you erase or do not record your own
greeting message, the unit plays a
prerecorded greeting message for
callers and ask them to leave
messages.
Playing back the greeting
message
Press {GREETING CHECK}.
Erasing your greeting
message
Press {GREETING CHECK}, and then
press {ERASE} while your greeting
message is playing.
Answering System
Listening to messages
using the base unit
When new messages have been
recorded, the MESSAGE indicator on
the base unit flashes.
Press {MESSAGE}.
L The base unit plays new messages.
L When you have no new messages,
the base unit plays back all
messages.
Operating the answering
system
Key Operation
{>} or {<}
Adjust the speaker
volume
{<}
Repeat message
(during playback)
{>}
Skip message
(during playback)
{STOP}
Pause message
– To resume
– To stop playback
{ERASE}
Erase message
currently playing
*1 If pressed within the first 5 seconds
of a message, the previous
message is played.
Erasing all messages
Press {ERASE} 2 times while the unit is
not being used.
*1
playback, press
{MESSAGE}.
completely, press
{STOP} again.
29