Battery Charge - Panasonic KX-TG6051NZ Operating Instructions Manual

Preparation
Battery installation/
replacement
1
Press the notch of the handset cover
firmly, and slide it in the direction of
the arrow.
L If necessary, remove the old
battery.
2
Insert the battery (A), and press it
down until it snaps into position (B).
Then close the handset cover (C,
D).
B
A
Important:
L Use only the rechargeable Panasonic
battery noted on page 4.

Battery charge

Place the handset on the base unit or
charger for 7 hours before initial use.
L While charging, "Charging" is
displayed and the charge indicator on
the handset lights in amber. When the
battery is fully charged, "Charge
completed" is displayed and the
indicator lights in green.
10
Base unit:
Charger:
Available model:
KX-TG6052
C
D
Note:
L If you want to use the handset
L To ensure that the battery charges
L When the battery is empty, "Charge
Charge
contacts
immediately, charge the battery for at
least 15 minutes.
properly, clean the charge contacts of
the handset, base unit, and charger
with a soft, dry cloth once a month.
Clean more often if the unit is subject
to the exposure of grease, dust, or
high humidity.
for 7h" is displayed and the charge
indicator does not light for about 5
minutes to concentrate on charging.
Charge
contacts