Dirt Devil DDCW600 User Manual page 9

VEC-101 & 102 User Guide.qxd:User guide
---
---
FAQs
FAQs
WARNING: to reduce the risk of personal injury, unplug the vacuum cleaner
!
before performing maintenance/troubleshooting checks.
Why wont my cleaner run?
Power cord not firmly pushed into a
•
mains socket.
- Ensure cord is plugged in firmly.
• Blown house fuse or tripped circuit breaker.
- Check fuse/breaker. Replace fuse or
reset breaker.
Why doesn't my vacuum pick up
/ loss of suction?
• Dirty water tank is not installed correctly.
- Refer to page 6 for fitting information.
• Dirty water tank is full.
- See 'Emptying the dirty water tank'.
• Broken or worn belt.
- Replace the belt.
• Brush roll is worn.
- Replace the brush roll.
• Nozzle/dirt passage is clogged.
- Remove obstruction.
• Float prematurely activated.
- Refer "Important" notes on page 6.
dirtdevil.com.au
12/11/09 16:48 Page 8
Why is dust escaping from the
vacuum?
• Dirty water tank is full.
- See 'Emptying the dirty
water tank' page 6.
• Dirty water tank is not installed properly..
- Refer to page 7 for fitting
information.
• Solution reservoir not installed correctly.
- Refer to 'How to operate your
cleaner' page 4.
Why won't my cleaner dispense
sollution?
• Solution reservoir not installed correctly.
- See 'How to operate your
cleaner'.
• Solution tank empty.
- Fill tank see page 5.
AU: 1300 361 505 / NZ: 0800 800 900
Dirtdevil.com.au
9