Advertisement
CAUTION: BEFORE PERFORMING
ANY SERVICE
OR ADJUSTMENTS:
1.Depress brake p edal fully
and set parking brake.
2. Place attachment clutch in "DISENGAGED" position.
3. Turn ignitionkey "OFF" and remove key.
4. Make sure the blades and all moving parts have completely stopped.
5. Disconnect spark plug wire from spark plug and place wire where it cannot
come in contact with plug.
TRACTOR
TO REMOVE MOWER
1. Place attachment clutch in "DISEN-
GAGED" position.
2. If equipped, turn height adjustment
knob to lowest setting.
3. Lower mower to its lowest position.
4. Disengage belt tension rod from lock
bracket.
ACAUTION:
Rod is spdng loaded. Have
a tight grip on rod and release slowly.
5. Remove retainer spring holding anti-
swaybar to chassis bracket and
disengage anti-swaybar from bracket.
6. Remove four retainer springs from
front plate assembly and remove
plate.
Suspension
BeltTension
At{
Rod
,
,)
(Disengaged_,_;,
Position)
",
Chassis
7. Remove retainer springs from
suspension arms at deck and disen-
gage arms from deck.
8. Raise attachment lift to its highest
position.
9. Slide mower forward and remove belt
from electric clutch pulley.
10.Slide mower out from under nghtside
of tractor.
TO INSTALL MOWER
Follow procedure described in "INSTALL
MOWER AND DRIVE BELT" in the
Assembly section of this manual.
Electric
Clutch PuUey
Front Mower
Bracket
Front
Plate
Retainer
Sprin_
Anti-Sway
Bar
Re_iner Spnngs
Retainer Springs
(Both Sides)
Bracket
23
Advertisement
