Level 2 Service Manual
G
6809495A97-O
3.
Carefully remove the main board and keyboard out of the front housing.
Figure 16. Removing the Main Board and Keyboard
This product contains static-sensitive devices. Use anti-static handling procedures
to prevent electrostatic discharge (ESD) and component damage.
4.
To replace, align the main board and keyboard to the rear housing assembly
and lower it into place on the rear housing.
5.
Press display flex onto transceiver board adhesive.
6.
Press display flex connector onto its socket.
7.
Replace the keyboard stiffener, speaker cover, keypad bezel, antenna, battery,
and battery cover as described in the procedures.
Main board
Disassembly tool
May 15, 2006
Disassembly
Keyboard
060252o
29