Related Manuals for ZALMAN CNPS5X PERFORMA
Summary of Contents for ZALMAN CNPS5X PERFORMA
- Page 1 User’s Manual CNPS5X PERFORMA Intel Socket 1155 / 1156 / 775 CPUs AMD Socket FM2/FM1/AM3+/AM3 / AM2+ / AM2 CPU&APUs To ensure safe and easy installation, please read the following precautions www.ZALMAN.com Ver.121113...
-
Page 2: Specifications
Product design and specifications may be revised to improve quality and performance. Enable PWM function in BIOS settings after installation. Disclaimer) Zalman Tech Co., Ltd. is not responsible for any damages due to external causes, including but not limited to, improper use, problems with electrical power, accident, neglect, alteration, repair, improper installation, or improper testing. -
Page 3: Installation Requirements
3. Components Cooler Backplate User’s Manual Thermal Grease 4. Installation Requirements 1) Space Requirements The cooler’s installation requires an unobstructed space of 130㎜(width), 65㎜(length), and 135㎜(height), with the CPU as a central reference point. Please check if components such as ODDs and PSU protrude into the required space. -
Page 4: Installation
3) Cooler Orientation As shown in the diagram below, it is recommended that the cooler be installed so that air flows from the cooler toward the enclosure’s rear exhaust fan to be released. ※ Recommended cooler orientation may differ according to the motherboard model. - Page 5 ② Align the Clip Support to the motherboard and fasten with the Pushpins. ③ Clear off any particles or residue from the CPU’s surface. Then spread a thorough layer of Thermal Grease on the CPU and the base of the cooler. .COM...
- Page 6 ④ Completely unfasten the 2 bolts already assembled on the clip and adjust the position to fit the Intel socket. When reassembling the bolt, be sure to assemble only half way of the total length. Location of Intel Socket bolts ⑤...
- Page 7 AMD Socket FM2 / FM1 / AM3+ / AM3 / AM2+ / AM2 Installation ① Clear off any particles or residue from the CPU’s surface. Then spread a thorough layer of Thermal Grease on the CPU and the base of the cooler. ②...
- Page 8 ④ Connect the cooler’s 4-pin connector to the motherboard’s CPU Fan header. Caution The PWM fan’s operation will vary depending on the motherboard’s BIOS settings. .COM...