Seat Belts Not Fastened; Heated Rear Window; Heated Windscreen - Ford 2008 Ka Owner's Handbook Manual

095-104 Ford KA EN_091-100 Ford KA IT 10/04/14 11:34 Pagina 104
In this way the iTPMS warns the driver
that one or more tyres may be flat and
liable to puncture.
In these circumstances restore the
correct inflation pressure values (see
"Wheels" paragraph in the "Technical
specifications").
Once the normal operating conditions of
the car are restored, carry out the Reset
procedure.
IMPORTANT Do not continue driving
with one or more flat tyres as handling
may be compromised. Stop the car,
avoiding sharp braking and steering.
iTPMS failure/iTPMS temporarily
deactivated
The warning light flashes for about 75
seconds and then stays on constantly
(together with a message in the display)
to indicate that the system is temporarily
disabled or faulty.
The system goes back to normal
operation when the operating conditions
allow it. If this is not the case carry out
the Reset procedure after restoring the
normal operating conditions.
If the malfunction warning persists,
contact a Ford Dealership as soon as
possible.
104
SEAT BELTS
<
NOT FASTENED (red)
The warning light on the
display will light up when the car
is moving and the driver's seat belt is not
correctly fastened. The warning light will
go on blinking, and a steady buzzer will
be emitted for the first 6 seconds when
front seat belts are not properly fastened
and the vehicle is running; for the next
90 seconds the warning light will
continue blinking and the buzzer
will become intermittent.
The SBR (Seat Belt Reminder) can only
be turned off by the Ford service
network. Contact a Ford Dealership
to deactivate/reactivate it.
The SBR system can be reactivated
through the display set-up menu if the
vehicle is equipped with a multifunction
display. The display will show the
dedicated message.
HEATED REAR
(
WINDOW (amber)
The warning light turns
on when switching the heated
rear window on.

HEATED WINDSCREEN

A
(amber)
The warning light turns
on when the heated windscreen
is turned on.