Ford 2008 Ka Owner's Handbook Manual page 111

105-132 Ford KA EN 08/04/14 08:39 Pagina 110
A
fig. 3
To change a wheel proceed as follows:
❒ stop the car in a position so that it
is not a danger for on-coming traffic
and where you can replace the wheel
safely. The ground must be flat and
sufficiently compact;
❒ switch the engine off and pull up
the handbrake.
❒ engage the first gear or reverse;
❒ lift the luggage compartment mat
A-fig. 3;
110
KA00062m
fig. 4
❒ loosen the clamping device
B-fig. 4;
❒ take out the tool container C
and take it near to the wheel
to be changed;
❒ take the space-saver wheel D;
❒ to remove the hub cap use the
supplied screwdriver, prising on
the special slit on the outer rim;
fig. 5
❒ for the vehicles equipped with alloy
rims, remove the pressure-fitted hub
cap using the supplied screwdriver;
❒ loosen by about one turn the bolts
on the wheel to be replaced, using
the wrench E-fig. 5;
❒ turn the jack crank to open it
partially;
KA00063m
KA00064m