Toshiba e-STUDIO351c Service Handbook page 321

(2) Adjust it by turning the adjustment screws on the hinges.
• Adjust the height on the rear side by means of the screw on the hinge on the feed side of the
RADF.
Turn it clockwise ................. Heightened
Turn it counterclockwise ...... Lowered
• Adjust the gap on the rear side by means of the screw on the hinge on the feed side of the
RADF.
Turn it clockwis .................... Lowered
Turn it counterclockwise ...... Heightened
June 2005 © TOSHIBA TEC
Fig.3-50
Fig.3-51
e-STUDIO281c/351c/451c ADJUSTMENT
3 - 69
3