Salt Refill Indicator F - Miele G 4170 SCVI Operating Instructions Manual

Before using for the first time
^ Remove the lower basket and
unscrew the salt reservoir cap.
Only open the salt reservoir when
you want to fill it with dishwasher salt
as water or salt solution will run out
of the reservoir when the cap is
removed.
^ Fill the reservoir with approx. 2 litres
of water (first use only).
^ Place the funnel provided over the
salt reservoir and carefully fill with
salt until the reservoir is full. The salt
reservoir holds approx. 2 kg of salt
depending on the brand used.
As the salt reservoir is filled,
displaced water will overflow.
^ Clean any excess salt from around
the reservoir opening and then screw
the cap on again firmly.
^ Run the Quick wash programme
9 40°C immediately (without any
crockery in the dishwasher) to
remove any traces of salt from the
cabinet.
18

Salt refill indicator F

^ Fill the salt reservoir with dishwasher
salt when the salt indicator light F
comes on. (If it comes on during a
programme, wait until the end of the
programme).
After the reservoir has been filled, the
water softener is automatically
reactivated the next time the
dishwasher is run. The salt indicator
light may still be illuminated during this
process. It will go out once the salt
concentration has reached the correct
level.
The salt refill indicator will not come on
if the dishwasher has been
programmed for a water hardness level
of less than 0.7 mmol/l (4°d - German
scale).
,
After filling the salt reservoir, run
the Quick wash programme 9 40°C
immediately (without any crockery in
the dishwasher) to remove any
traces of salt from the cabinet.