Water Inlet/Drain Fault - Miele G 4170 SCVI Operating Instructions Manual

Water inlet/drain fault

Problem
The dishwasher
stops working
shortly after the start
of the programme.
The buzzer sounds.
The Inlet/drain check
light 2 / 2 flashes
when the door is
opened.
The dishwasher
stops during a
programme.
The buzzer sounds.
The Inlet/drain check
light 2 / 2 flashes
when the door is
opened.
Possible cause
The stopcock is
closed.
Water intake is
restricted.
The water outlet is
restricted, water
remains in the
wash cabinet at
the end of a
programme.
Problem solving guide
Remedy
– Open the stopcock fully.
Before rectifying the problem:
– Switch the dishwasher off with the
Off button V.
– Open the stopcock fully.
– Clean the water inlet filter (see
"Maintenance").
– The water pressure at the intake is
lower than 30 kPa (0.3 bar).
Seek professional advice.
– Clean the filter combination. See
"Cleaning and care".
– Clean the drain pump. See
"Maintenance".
– Clean the non-return valve. See
"Maintenance".
– Remove any kink in the drain
hose.
43