Sunbeam Cafe Series EM7100 Instruction/Recipe Booklet page 14

Using your espresso machine continued
Programming
1 Cup Volume
PREPARE the 1 cup filter with coffee and
tamp.
PLACE a cup under the espresso pour spouts.
PRESS the 1 CUP button, for over 1 second.
Press the 1 CUP button again once the
desired volume of espresso has been
extracted.
The espresso machine will beep twice to
indicate the new program for the 1 CUP
operation has been set.
2 Cup Volume
PREPARE the 2 cup filter with coffee and
tamp.
PLACE 2 cups under the espresso pour
spouts.
PRESS the 2 CUP button, for over 1.5
seconds.
The LED will flash and the pour will start
immediately.
Press the 2 CUP button again once the
desired volume of espresso has been
extracted.
The espresso machine will beep twice
to indicate the new program for 2 CUP
operation has been set.
12
Resetting the Factory Settings
To revert back to the espresso machines
factory settings;
1. Ensure the espresso machine is plugged in
and switched on at the power outlet.
Note: DO NOT press the POWER button on
the espresso machine.
2. PRESS and HOLD DOWN the MANUAL
button.
3. While still holding down the MANUAL
button, briefly PRESS the POWER button
and then release the MANUAL button.
4. 4 beeps will sound and the machine will
power on.