Using Your Espresso Machine - Sunbeam Cafe Series EM7100 Instruction/Recipe Booklet

Plus multi-capsule
Hide thumbs Also See for Cafe Series EM7100:
Table of Contents

Advertisement

Using your espresso machine

Power
Press the POWER button once to turn the
espresso machine on. The machine will beep
once and the power button will flash red, this
is to indicate that your machine is on and is
heating up.
Note: Before turning on the espresso machine
ensure that the steam and hot water control
dials are in the OFF position.
When the machine has reached READY
MODE, the power button will stop flashing
and the POWER, MANUAL, 1 & 2 CUP
buttons will illuminate white. The espresso
machine is now ready to use.
Power Saving Mode
After 1 hour of non-use the espresso machine
will automatically switch to POWER SAVING
MODE. Once the espresso machine is in
POWER SAVING MODE all the lights on the
buttons will dim. While in POWER SAVING
MODE the espresso machine powers down
to 75% of power. After a further 4 hours of
non-use the espresso machine will beep once
and then turn off.
To bring the espresso machine out of POWER
SAVING MODE you simply need to press any
of the buttons on the control board.
Using Manual Operation
The MANUAL button gives the user complete
control over the length of the espresso pour.
To use this operation press the MANUAL
button once to start the espresso pour. The
pour will start with the pre-infusion and then
the espresso pour will follow.
Press the MANUAL button again to stop the
espresso pour.
Note: When using the MANUAL operation, the
lights on the 1 & 2 cup buttons will go off
and the lights on the POWER and MANUAL
buttons will remain on.
8
1 Cup Espresso Pour
The 1 CUP function removes the guess
work and is programmed to pour 30mls of
espresso.
Tip: We recommend using the 1 CUP basket
when using the programmed 1 CUP function.
To use this operation press the 1 CUP button
once to start the espresso pour. The pour
will start with the pre-infusion and then the
espresso pour will follow.
The espresso pour will stop after the 1 CUP
volume has been extracted.
Note: When using the 1 CUP function, the
lights on the MANUAL and 2 CUP buttons
will go off and the lights on the POWER and
1 CUP buttons will remain on.
Note: When using the 1 CUP function the
coffee maker can stop the espresso pour at
any time by pressing the MANUAL, 1 or 2
CUP buttons.
Figure 1
Figure 2

Advertisement

Table of Contents
loading

Table of Contents