Table of Contents
Advertisement
20
ENTERTAINMENT
Connecting to a wireless net-
work
(Except for 50/60PZ57 ** )
The LG Wireless LAN for Broadband/DLNA Adap-
tor, which is sold separately, allows the TV to con-
nect to a wireless LAN network.
The network configuration and connection method
may vary depending on the equipment in use
and the network environment. Refer to the setup
instructions supplied with your access point or
wireless router for detailed connection steps and
network settings.
Setting up the AP (Access Point) or the wireless
router is required before connecting the TV to the
network. The easiest method is the WPS button
method (Third method in this section).
WIRELESS
CONTROL
AV IN 1
AV IN 2
AUDIO / VIDEO
OPTICAL DIGITAL
PTICAL DIGIT
TICAL DIGIT
ANTENNA
ANTENNA/
ANTENNA
COMPONENT IN 2
H/P
AUDIO OUT
CABLE IN
AUDIO / Y P
P
B
R
NOTE
y For enjoying pictures, music or video stored
y
on a PC using the router, a wired connection
is recommended.
y When the wireless port of the router is used,
y
there may be restrictions on some functions.
y It is recommended that an Access Point
y
(AP) be located more than 1 m away from
the TV. If the AP is installed closer than 1
m, the magic motion remote control may
not perform as expected due to frequency
interference.
LAN
Router
@
ETHERNET
Cable modem
Internet
To set up the network settings,
1
Press Home to access the Home menus.
2
Press the Navigation buttons to scroll to
SETUP and press OK.
3
Press the Navigation buttons to scroll to NET-
WORK and press OK.
4
Press the Navigation buttons to select Net-
work Setting and press OK.
5
Press the Navigation buttons to select Wire-
less and press OK.
6
If you already set Network Setting, select Re-
setting and press OK.
The new connection settings resets the current
network settings.
7
Press the Navigation buttons to select Setting
from the AP list and press OK.
- Scan the all available AP (Access Point) or
wireless routers within range and display
them as a list.
WAN
Selecting the wireless network setting type
8
Press the Navigation buttons to select an AP
(Access Point) or wireless router on the list. (If
your AP is secured, you will prompted for the
key.) And press OK.
Selecting AP
Select AP you want to connect.
Input the new SSID
iptime
ASW
Network1
9
Press the Number buttons to Input the security
key of AP and press OK.
Select the wireless network setting type.
Setting from the AP list
Simple setting (WPS-button mode)
Setting Ad-hoc network
ꔉ Next
ꕉ Previous
ꕯ
Exit
Page 1/1
Access Point
Search
PIN
Connect
Previous
Exit
Advertisement
Table of Contents
