Connecting With An Hdmi Cable - LG 50PJ2 Series Owner's Manual

Hide thumbs Also See for 50PJ2 Series:

Table of Contents

CONNECTING WITH AN HDMI CABLE

Connect the HDMI output of the external equip-

ment (digital set-top box, DVD, etc.) to HDMI/DVI

IN 1(DVI), HDMI IN 2 or HDMI IN 3 (Except for

42/50PJ2***) jack on the TV.

Turn on the external equipment.

Select HDMI1, HDMI2 or HDMI3 (Except for

42/50PJ2***) input source using the INPUT but-

ton on the remote control.

NOTE

►Check that your HDMI cable is version 1.3 or higher. If the HDMI cables don't support HDMI version

1.3, flickering or no screen display can result. Please use the latest cables that support at least HDMI

version 1.3.

► HDMI mode supports PCM audio format only.

► Audio format was reseted to Dolby/DTS/Bitstrem in DVD Player or STB, it should be changed to PCM.

► We recommed using under 10m of the HDMI cable. When using over the length, connect a amplifier

or repeater.

► If the DVD does not support Auto HDMI, you must set the output resolution appropriately.

Table of Contents