Connecting To An Antenna; Turning The Tv On For The First Time; Connecting An Antenna - LG 50PZ95 Series Owner's Manual

WATCHING TV

Connecting to an antenna

Connect an antenna to watch TV while referring to
the following.
To prevent damage do not connect to the mains
outlet until all connections are made between the
devices.

Connecting an antenna

Connect the TV to a wall antenna socket with an
RF cable (75 Ω).
NOTE
y Use a signal splitter to use more than 2
y
TVs.
y If the image quality is poor, install a signal
y
amplifier properly to improve the image
quality.
y If the image quality is poor with an
y
antenna connected, aim the antenna to
the correct direction.
y An antenna cable and converter are not
y
supplied.
Turning the TV on for the
first time
When you turn the TV on for the first time, the
Initial setting screen appears. Select a language
and customize the basic settings.
1
Connect the power cord to a power outlet.
2
In Standby mode, press
the TV on.
The Initial setting screen appears if you turn
the TV on for the first time.
NOTE
y You can also access Factory Reset by
y
accessing OPTION in the Home menu -
SETUP.
(POWER) to turn
3
Follow the on-screen instructions to customize
your TV settings according to your preferences.
Language Selects a language to display.
(Except for Australia, New
 Zealand, Singapore, South
Africa),
Mode Setting Selects Home Use for the
Home environment.

Country Selects a country to display.
(Only Australia, New Zealand)

Time Zone Selects the time zone and day-
light saving.(Only Australia)

Auto Tuning Scans and saves available
channels automatically.
NOTE
y DTV mode control buttons may not
y
function based on country broadcasting
circumstances.(Only DTV)
y For those countries without confirmed
y
DTV broadcasting standards, some DTV
features might not work, depending on
the DTV broadcasting environment.(Only
DTV)
y To display images in the best quality for
y
your home environment, select Home
Use.
y Store Demo is suitable for the retail
y
environment.
y If you select Store Demo, the any
y
customized settings will switch back to
the default settings of Store Demo in 5
minutes.
4
When the basic settings are complete,
press OK.
NOTE
y If you do not complete the Initial setting, it
y
will appear whenever the TV turns on.
y Disconnect the power cord from the
y
power outlet when you do not use the TV
for a long period of time.
5
To turn the TV off, press
17
WATCHING TV
(POWER).