Network Connection; Connecting To A Wired Network - LG 50PZ95 Series Owner's Manual

ENTERTAINMENT

Network Connection

Connecting to a wired network

Connect the TV to a local area network (LAN) via
the LAN port as shown in the following illustration
and set up the network settings.
If wired and wireless networks are both available,
wired is the preferred method.
After making a physical connection, a small
number of home networks may require the TV
network settings to be adjusted. For most home
networks, the TV will connect to automatically
without any adjustments.
For detail information, contact your internet pro-
vider or router manual.
Router
@
Internet
CAUTION
y Do not connect a modular phone cable to the
y
LAN port.
y Since there are various connection meth-
y
ods, please follow the specifications of your
telecommunication carrier or internet service
provider.
y After connecting the LAN port, use the
y
Premium or LG Apps menu.
COMPONENT
IN 1
WIRELESS
CONTROL
AV IN 1
OPTICAL DIGITAL PTICAL DIGIT TICAL DIGIT
LAN RGB IN (PC) AUDIO IN AUDIO IN AUDIO IN
AUDIO OUT
(RGB/DVI)
LAN WAN
ETHERNET
Cable modem
To set up the network settings: (Even if your TV
has already connected automatically, running
setup again will not harm anything),
1
Press Home to access the Home menu.
2
Press the Navigation buttons to scroll to
SETUP and press OK.
3
Press the Navigation buttons to scroll to NET-
WORK and press OK.
4
Press the Navigation buttons to select Net-
work Setting and press OK.
5
If wired and wireless are simultaneously con-
nected, press the Navigation buttons to select
Wired and press OK.
6
If you have already set the Network Setting,
select Resetting. The new connection settings
will reset the current network settings.
7
Select IP Auto Setting or IP Manual Setting.
AV IN 2
AUDIO / VIDEO
ANTENNA ANTENNA/ ANTENNA
COMPONENT IN 2 H/P
CABLE IN
- If selecting IP Manual Setting, press the
AUDIO / Y P P
B R
Navigation and Number buttons. IP address-
es will need to be input manually.
- IP Auto Setting: Select this if there is a
DHCP server(Router) on the local area
network (LAN) via wired connection, the TV
will automatically be allocated an IP address.
If you're using a broadband router or broad-
band modem that has a DHCP (Dynamic
Host Configuration Protocol) server function.
The IP address will automatically be deter-
mined.
- IP Manual Setting: Select if there is no
DHCP server on the network or you want to
set the IP address manually.
8
When you are finished, press EXIT.
NOTE
y If you want to access the Internet directly on
y
your TV, the broadband internet connection
should always be on.
y If you cannot access the Internet, check
y
the network conditions from a PC on your
network.
y When you use Network Setting, check the
y
LAN cable or check if the DHCP in the router
is turned on.
y If you do not complete the network settings,
y
the network may not work properly.
19
ENTERTAINMENT