Manual Time Setting - La Crosse Technology WS9245 Instruction Manual

User can therefore easily see whether the last reception was successful ("ON" icon) or not
("OFF" icon). On the other hand, the short blinking of the icon shows that a reception is
being done at that time.

MANUAL TIME SETTING:

To manually set the time of the Temperature Station:
Hour (flashing)
1. Press and hold the SET key for 3 seconds to enter the manual time setting mode.
2. The hour digit of the time display will be flashing.
3. Press the + key to adjust the hour (press and hold to allow fast advance). Press
SET key to confirm and go to the minute setting.
4. The minute digit will be flashing. Press the + key to adjust the minute (press and
hold to allow fast advance). Press SET key once more to return to normal display.
Note:
If no buttons are pressed within approximately 8 seconds while in setting mode, the unit
will return to normal operating mode.
VIEWING THE INDOOR TEMPERATURE AND MIN/MAX
26
Minutes (flashing)