Introduction
Thank you for purchasing the Peavey® RBN™118 Sub powered speaker system. The RBN™118 Sub features a
power section that provides 2000 watts of peak power, with DDT™ compression. Featuring an 18" Low Rider™
woofer in a sturdy plywood enclosure, the RBN™118 Sub provides two mixed input channels, each with Gain
control and a mic/line gain switch, and each channel features a combo jack with 1/4" TRS & female XLR and a
balanced input with volume control. A DSP based crossover and processor provides extreme flexibility to the
user faced with common location acoustics conditions.
Features
•
Vented bass powered subwoofer enclosure
•
2000 watts peak dynamic power
•
Peavey® exclusive Low Rider™ 18" Woofer
•
Peak SPL up to 128 dB with music!
•
Power Amp has forced air cooling for maximum reliability
•
Powerful yet precise DSP based crossover network and speaker processing
•
24 bit ADC/DAC, 96 kHz sample rate, 32 bit fixed point DSP
•
DSP based limiter for woofer protection
•
Two independent mixed channels with XLR/one quarter inch combo jack inputs
•
Input 2 has a 3.5 mm (1/8") stereo media input jack
•
Two XLR outputs, One High-Pass, One Full Range Thru
•
Large Heavy-Duty Locking Casters with damped bearings
•
Full-coverage heavy-duty perforated steel grill
•
Tough 18 mm birch plywood construction with internal bracing
•
Two Pairs of Steel handles
•
Threaded Pole Mount with speaker pole included
Description
The Peavey® RBN™ 118 Sub is a compact vented powered subwoofer system utilizing a Peavey® exclusive Low
Rider™ 18" woofer, coupled to a power amplifier with 2,000 watts peak available power. The full-length black
perforated steel grille provides protection and a professional appearance, along with the sturdy steel handles
and heavy-duty 4" tall casters for transport.
Internal line-level crossover with two outputs, independently electrically buffered; one full-range thru output,
and one high-pass output.
A threaded pole-mount system provides a sturdy and stable platform to mount a suitably equipped speaker
system above the sub woofer. Either the RBN™112 or the RBN™110 two-way powered speakers are an excellent
partner for the RBN™ 118 Sub.
The RBN™ 118 Sub speaker system power amplifier providing the power is a low-distortion ultra-reliable fan-
cooled unit providing 2,000W peak available power for the system. The power supply for the power amp is a
switch mode type for low weight and high efficiency. The amplifier features our DDT™ compression, which
virtually eliminates audible power amplifier clipping. Cooling is provided via a low-noise fan, for reliable oper-
ation under any conditions.
ENGLISH