Assembling The Product - Morphy Richards Hand held vacuum cleaner Instructions Manual

Morphy richards hand held vacuum cleaner

Hide thumbs Also See for Hand held vacuum cleaner:

Instructions manual (12 pages)

Table of Contents

Hand held vac rev 3 73106/07

Cleaning turbo nozzle

If the turbo nozzles rotating brush becomes

entangled with hair it may require taking apart

and cleaning

1 Unclip the top half of the nozzle by pulling

the upper casing out slightly and lifting

off.E

Clear out any blockages /pet hair, remove

all components.and clean if necessary.

2 The main turbo wheel has a removable

collar, this must be re-assembled

correctly, other wise the nozzle will not go

back together.

3 To re-assemble nozzle, take the brush bar

with the toothed belt positioned over the

track on the bar (notice the rectangular

Ensuring that the turbo wheel is correctly

placed, loop the toothed wheel through the

belt and lower the turbo wheel into the

grove, provided in the lower casing. The

internal assembly should be complete.

4 Ensuring that the brush bar, the turbo

wheel and the belt are correctly located

and positioned, take the top casing

and position the slots over the teeth at

the front of the lower casing and clip

back into position.

4/11/05

1:32 PM

(pets models only)

locators on either side of

the brush bar). F

Slot the brush bar into the

relevent tracks on either

side of the lower casing.

Page 5

After re-assembly fit turbo nozzle on unit and

ensure the brush bar is rotating correctly.