Automatic Time Configuration; Set The Date And Time Manually - D-Link DSL-2700U User Manual

Daylight Saving Dates
When you are making changes, click on Save Settings to save your
changes.

Automatic Time Configuration

The following table describes the labels in this screen.
LABEL
Automatically Synchronise with Internet
Time Servers
NTP Time Server
A Network Time Protocol (NTP) server can automatically set the
router's time for you. If you use an NTP server, you will only need to
select your time zone. If you manually set the time, you can enable
Daylight Saving. The router will automatically adjust when Daylight
Saving goes into effect.
When you are making changes, click on Save Settings to save your
changes.

Set the Date and Time Manually

Network Address Translation (NAT) translates the host IP address in
a packet used within one network to a different IP address known
within another network.
Select the DST start and DST end from the drop-down list.
Choose how you want your device to obtain the time.
Enter the NTP server address you wish to use here.
25
DESCRIPTION