Sony SAL50M28 Service Manual page 24

HELP20
Grease (G-85): J-6082-626-A
Adhesive bond (B-40): J-6082-614-A
Apply the grease (G-85) to the instruction part of the linear guide key and apply the adhesive bond (B-40) to the four screws.
Apply the
adhesive bond (B-40)
Apply the
grease (G-85)
HELP21
Adhesive bond (B-40): J-6082-614-A
1. Set the fixed barrel unit to infinity.
2. Install the middle tube block so that the notch of the focus cam ring and one of the fixed barrel unit are aligned.
3. Align the cam groove of the focus ring, one of the fixed barrel unit and the screw hole of the focus cam ring. Then apply the adhesive
bond (B-40) to the guide pin and install the guide roller.
Apply the adhesive bond (B-40)
Guide Roller
Notch Portion
Apply the
adhesive
bond (B-40)
Notch portion
Middle Tube Block
SAL50M28 (MACRO 2.8/50) (50mm F2.8 Macro)
Apply the
grease (G-85)
Apply the adhesiv
bond (B-40)
Guide Roller
Fixed Barrel Unit
Guide Roller
Focus Cam Ring
Screw hole
Apply the
adhesive
bond (B-40)
HELP