Sony SAL50M28 Service Manual page 19

5. Align the projection of the torque ring block and the groove of the focus ring as shown in the figure, and attach it.
Focus Ring
Groove
Projection part
6. Check wobbles of the three pinch lever assemblies. Then use the adjustment screw for adjustment. (Make sure the float ring does not
rotate accordingly when turning the torque ring by any slipping lever block.)
Float Ring
Torque Ring
HELP09
Adhesive bond (B-40): J-6082-614-A
Apply the adhesive bond (B-40) to the four screws.
Apply the
adhesive
bond (B-40)
SAL50M28 (MACRO 2.8/50) (50mm F2.8 Macro)
Adjustment Pin
Slipping Lever Block
A adjustment pin is turned
and wobbles is adjusted.
Apply the
adhesive
bond (B-40)
HELP