Technical Specifications - Symbol LS 4000P Series Product Reference Manual

Technical Specifications

Item
Power Requirements*
PC Wedge/Synapse
RS-232C/Synapse
Low Power
Decode Capability
Beeper Operation
Scan Repetition Rate
Scan Angle
Roll (Skew) Tolerance
Pitch
Yaw
1-D Decode Depth of Field
2-D Decode Depth of Field
Print Contrast Minimum
*For direct host power connection, make sure the host terminal supplies sufficient power for the
specified operation. Symbol is not responsible for damage to host equipment or system mis-
operation due to an insufficient power condition.
Table 4-2. Technical Specifications
4.5 to 5.5 VDC (max) 200 mA @ 5V typical
4.5 to 5.5 VDC (max) 190 mA @ 5V typical
4.5 to 5.5 VDC (max) 400 µA @ 5V typical
The LS 4000P can be programmed to decode the following
code types: UPC/EAN, Bookland EAN, Code 39, Code
39 Full ASCII, Trioptic Code 39, Code 93, Codabar,
Interleaved 2 of 5, Code 128, EAN 128, Discrete 2 of 5,
MSI Plessey, and PDF417. Set code length(s) for any linear
code type. The LS 4000P can auto-discriminate between all of
the above code types except for Code 39 and Code 39 Full
ASCII. Transmission of decoded information depends on the
capabilities of the attached terminal.
User-selectable: Enabled, Disabled
186 scans/sec (bidirectional)
±37°
±45° from normal
±60° from normal
±30° from normal
See LS 4000P 1-D Decode Zone on page 4-5
See LS 4000P 2-D Decode Zone on page 4-6
MRD 25% absolute dark/light differential, measured at 650
nm.
Maintenance & Specifications
Description
4-3