Connections - Honeywell 3MP User Manual

3 Connections

1. RJ45 LAN socket: Connect to PC or Hub/Switch.
It's for connections to 10Base-T Ethernet, 100Base-TX, or 1000Base-TX Ethernet cabling.
This Ethernet port built N-Way protocol can detect or negotiate the transmission speed of
the network automatically. Please use Category 5 or better cable to connect the Network
Camera to an Ethernet network switch or hub.
In the LAN socket, there are two LEDs embedded:
LAN LED (green color)
This LED will be flashing while network accessing via Ethernet.
Power LED (orange color)
This LED is used to indicate whether power is on or not.
2. RS-485: Connect to a local keyboard controller.
Honeywell
5