Honeywell 3MP User Manual page 46

Administrating the Device
40
Displays the date and time of the connected PC.
Adjust:
-
Synchronize with PC:
Click this option to enable time synchronization with PC time.
-
Manual setting:
Click this option to set time and date manually.
-
Synchronize with NTP:
Click this option if you want to synchronize the device's date and time with those of time
server called NTP server (Network Time Protocol).
NTP Server: Type the host name or IP address or domain name of the NTP server.
NTP sync. Interval: Select an interval between 1 and 24 hours at which you want to adjust
the device's time referring to NTP server
Time zone:
Set the time difference from Greenwich Mean Time in the area where the device is
installed.
Daylight Saving:
Disable or enable the daylight saving adjustment.
Maintenance
Hard Factory Default (Include the network setting):
Recall the device hard factory default settings. Note that click this button will reset all
device's parameters to the factory settings (including the IP address).